772119
48
Zoom out
Zoom in
Previous page
1/56
Next page
EN 8
Cleaning the filters
Saturation grease and odor/fine dust filters
The filters should be replaced or cleaned when the filter indicator key is
flashing.
Grease filter
The filter indicator key and speed key 1 will flash after 100 operating
hours.
The grease filters should then be cleaned.
Odor/fine dust filter
The filter indicator key and speed key 2 will flash after 200 operating
hours.
The odor/fine dust filter should then be replaced.
Reset the filter indicator
1. Switch off the cooker hood by touching the on/off key.
2. Switch off the lighting by touching the lighting key.
3. Reset the memory: touch and hold speed key 1 for approximately
three seconds.
All keys will flash three times.
If you have a cooker hood with a odor/fine dust filter, you should
activate the odor/fine dust filter indicator.
Switching on the odor/fine dust filter indicator (if necessary)
1. Switch off the cooker hood by touching the on/off key.
2. Switch off the lighting by touching the lighting key.
3. Touch and hold speed key 2 for approximately three seconds until
all keys flash twice.
The odor/fine dust filter indicator is activated.
Switching off the odor/fine dust filter indicator
1. Switch off the cooker hood by touching the on/off key.
2. Switch off the lighting by touching the lighting key.
3. Touch and hold speed key 2 for approximately three seconds until
all keys flash once.
The odor/fine dust filter indicator is deactivated.
OPERATION
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim BSSA970 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim BSSA970 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pelgrim BSSA970

Pelgrim BSSA970 Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info