Manual Peaq PDR220 - Internet Radio (page 43 of 122) (English, German, French, Italian, Spanish)

651193

Zoom out

Zoom in

1/122

ENGLISH

Internet-Radio Conﬁguration

There are two ways to connect the radio to

the internet using an access point:

•Wireless in WLAN-Mode

The WiFi-antenna of the radio receives

your DSL router signals.

•With cable using the radio’s LAN con-

nection in LAN-Mode

provided an ethernet network is available.

WLAN-MODE CONFIGURATION

If you have a wireless network, the WLAN

mode is the direct way to connect your ra-

dio to the Internet:

1. Simply switch the radio on and, as a

cable-free network client, it automati-

cally searches all available APs (Access

Points).

2. When switching on for the ﬁrst time,

you must conﬁrm the AP and perhaps

enter the key. For doing so please fol-

low instructions of below chapters.

After that, the radio will always access

this AP. If the AP can no longer be

found, it will be registered accordingly.

LAN CONFIGURATION

If you do not have a wireless network but

do have a cabled network, you can con-

nect the Internet radio with a network.

1. Switch the radio o.

2. Connect an Ethernet cable to the LAN

socket. Once switched on and choose

wired. The radio will automatically be

recognized as a cable client.

WLAN-REGION AND WLAN-NETWORK

Select the WLAN-Region in which you are

located. The device then looks for available

wireless networks. If a wireless network is

not found, the device shows the notiﬁca-

tions <No WLAN network found>. Please

check in this case whether your router and

WLAN are switched on.

Note

Make sure that the DHCP-server of your

router (Access Point) is activated. Other-

wise, the WLAN connection must be con-

ﬁgured manually. The WLAN should send

out the SSID. If the SSID is not sent out,

you must conﬁgure the WLAN manually.

•Select the network from which you want

to operate Internet radio.

PUBLIC NETWORK CONNECTION

Select the appropriate WLAN-network

by clicking on the entry of the network’s

name. The connection procedure takes

place automatically.

Note

In the Systems settings > Setup wizard,

you can manually conﬁgure the network.

IM_PDR220_160303_A_V04_HR.indb 43 3/3/16 11:19 AM

My Peaq radio is displaying a message of network timeout and I can't reconnect-when I try, using the pin number provided the message says 'failed to connect'
Do you have any advice ? Submitted on 10-11-2019 at 13:11
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Peaq PDR220 - Internet Radio in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 7,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Peaq PDR220 - Internet Radio Manual

Product: