598069
49
Zoom out
Zoom in
Previous page
1/51
Next page
Useful Hints
Released stitches
Released or dropped stitches may be caused by a stitch size that is too big or damaged latch needles. If caused by
damaged latch needles the appropriate needles have to be replaced.
Replacing a needle
- Pull out the needle rail situated below the upper rail at right until the defective needle is cleared.
- If either the needle head or the latch are damaged, the needle head must first be broken off with a pair of flat pliers.
- Holding the needle by its foot, remove it from the needle channel. If you have not removed the needle head, it is
absolutely essential to close the latch.
- Insert the new needle with its latch open from behind into the needle channel.
- Push the needle rail to its proper place again.
Jammed Lock
Set the needle return dial at I, and lift the lock off the
needle bed, tipping it forward slightly and then lifting it.
When you have dealt with the trouble, slide the lock
back on to the needle bed from the side. Take care
that the lock fits into the guide rails on the needle bed.
Turn the return dial to III again.
47
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Passap Swissknitter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Passap Swissknitter in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info