451578
1
Zoom out
Zoom in
Previous page
1/11
Next page
3200LS FAQ
1. What is the pairing code?
o The pairing code for the 3200LS is different each time and will be
displayed when a phone attempts to pair.
o If the pairing code does not automatically appear during the pairing
process than a code can be forced to appear by going to Settings -> Pair
with Phone -> Other Phone.
o Special paring modes exist for some phones. If your phone is listed in the
pair list use that mode. In the U.S. Most SonyEriccson phones will need a
mode and Nextel phones will need “IDEN phone” SETTING> PAIR
WITH PHONE> IDEN PHONES
o Most Windows phones will use OTHER PHONES, not WINDOWS CE.
Most U.S. PDAs are running Windows Mobile for SmartPhones, or
Windows Mobile for Pocket PC, not Windows CE..
2. Phone says unable to connect when pairing attempted, what is wrong?
o This can be caused by a number of issues:
Occasionally, all Bluetooth connection attempts fail for no
apparent reason. Always try again before proceeding to the steps
below.
Make sure that the pairing code of the kit is inserted correctly.
Some phones, especially PDA/Smart phones need to have the
numbers lock on for numbers to be inserted. Also, for many of
these phones, pressing “enter” on the keypad will not only send the
pairing code, but add “enter” as part of the passkey. Therefore, it
is important to verify that only numbers are being inserted and then
the directions on your phone’s screen are followed. Check your
phone's manual.
Make sure that the paired device list of the kit is not full. The kit
can only have up to 5 devices in its listing. If there are five
devices, one will need to be deleted before a new one can be
added.
Make sure the paired device list of the phone is not full. The
amount of devices a phone will allow varies by phone, so please
check your phone’s users manual.
Make sure that the memory of the kit is not full. This can be
checked under Settings – Information. The second line down
should give the amount of free memory available. If the memory
is low or full, deleting a paired device is the only way to free up
memory.
If the above steps do not work, it may be the case where the
Bluetooth on the phone just needs to be reset. In some cases, this
may be done by just turning off Bluetooth, then turning it back on.
However, most cases will require a soft reset of the phone. This
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parrot 3200 LS-Color at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parrot 3200 LS-Color in the language / languages: English as an attachment in your email.

The manual is 0,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parrot 3200 LS-Color

Parrot 3200 LS-Color User Manual - English, German, Dutch, French, Italian, Portuguese, Spanish, Spanish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info