679132
9
Zoom out
Zoom in
Previous page
1/12
Next page
10 GB/IE/CY
Preparing for use / Maintenance and cleaning / Disposal / Information
Note! Always switch on the delta sander before
bringing it into contact with the workpiece material.
Switching on the device:
j Move the ON / OFF switch
8
downwards
into the “ON” position.
Switching off the device:
j Move the ON / OFF switch
8
upwards into
the “OFF” position.
Q
Vacuum dust extraction
WARNING!
DANGER OF FIRE! There is
the danger of fire when working with electrical
devices that have a dust box or can be connected
to a vacuum cleaner. Under certain conditions the
wood dust in the dust extraction bag (or in the
vacuum‘s dust bag) may ignite, e.g. as a result of
flying sparks generated when abrading metals or
metal objects left in wood. This can happen partic-
ularly if the wood dust is mixed with paint residue
or other chemicals and the abraded particles are
hot from prolonged abrasion. Therefore you must
empty the device’s dust collection box and the
vacuum cleaner’s dust bag before taking a break
or stopping work and always avoid overheating of
the abraded particles and the device.
Wear a dust mask!
WARNING!
Always pull the mains plug is
out of the socket before doing any work on the
device.
Q
Dust box for internal
vacuum extraction
Connection:
j Push the dust box for internal vacuum extraction
4
on to the hand-held sander until it engages.
Removal:
j Press the release button
5
of the dust extraction
box for internal vacuum extraction
4
and
withdraw it towards the rear of the device.
Q
Reducer piece
Connection:
j Push the reducer piece
3
into the adapter
port
2
.
j Push the hose of a suitable dust extraction de-
vice approved for that purpose (e.g. a workshop
vacuum cleaner) on to the reducer piece
3
.
Removal:
j Pull the dust extraction device hose off the
reducer piece
3
.
j Pull off the reducer piece
3
.
Q
Attaching / detaching
sanding sheets
WARNING!
Always pull the mains plug is out
of the socket before doing any work on the device.
Attaching:
j Sanding sheets are attached to the backing plate
7
by means of the hook and pile fastening.
Detaching:
j Simply pull the sanding sheet off the backing
plate
7
(see Fig. C).
Q
Rotating the backing plate
WARNING!
Always pull the mains plug is out
of the socket before doing any work on the device.
j Rotate the backing plate
7
into the desired
position (see Fig. D).
Sanding and surfaces:
The sanding output and the quality of the surface
finish are determined by the grade of grit on the
sanding sheet.
Preparing for use
XQ2_Handschleifer_Content_LB6.indd 10 19.03.09 14:37
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside XQ2 SE - IAN 26047 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside XQ2 SE - IAN 26047 in the language / languages: English as an attachment in your email.

The manual is 2,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside XQ2 SE - IAN 26047

Parkside XQ2 SE - IAN 26047 User Manual - German, Dutch, French - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info