595356
5
Zoom out
Zoom in
Previous page
1/118
Next page
5
IEGB
The manufacturer is not liable for damages
caused by an improper use or incorrect
operation of this device.
General description
See the front fold-out page for
illustrations.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete:
- Device
- Handgrip
- Protective hood
- Chuck key
- Cutting disc
- Instruction Manual
Description of function
The angle grinder is made for cutting,
scrubbing or brushing metal. There is a
special disc for each of the separate ap-
plications. Please refer to the information
from the disc manufacturer.
Please refer to the descriptions below for
information about the operating devices.
Overview
1 Handgrip
2 Threads for handgrip
3 Speed regulator
4 Switch block
5 On/off switch
6 Threads for handgrip
7 Spindle stop button
8 Power plug
9 Chuck key
10 Cutting disc
11 Protective hood
12 Mounting ange
13 Clamping nut
14 Mounting spindle
15 Adjustment nut
16 Tightening lever
Technical data
Angle Grinder PWS 125 B2:
Rated input voltage
............................... 230-240 V~, 50 Hz
Power input ............................ 1200 W
Idling speed (n) ............3000-12000 min
-1
Safety class ..................................... II
Protection category......................... IP 20
Sound pressure level
(L
pA
) ...............92,1 dB(A); K
pA
= 3 dB(A)
Sound power level (L
wA
)
measured .....103,1 dB(A); K
wA
= 3 dB(A)
guaranteed .....106 dB(A); K
wA
= 3 dB(A)
Vibration (a
h
)
Main handgrip 11,237 m/s
2
K= 1,5 m/s
2
Supplemental handgrip
......................... 8,146 m/s
2
K= 1,5 m/s
2
Cutting disc:
Idling speed n
0
................................... max.12200 min
-1
Disc speed ....................... max. 80 m/s*
Outer diameter ................... Ø 125 mm
Bore hole ........................ Ø 22,23 mm
Thickness ...................................3 mm
*
The grinding disc must keep a rotational
speed of 80 m/s.
Levels of noise and vibration were determi-
ned according to the norms and regulations
in the declaration of conformity.
Technical and visual changes may be made
as part of ongoing development without
announcement. All dimensions, instructions
and specications are therefore without
guarantee. Legal claims on the basis of the
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PWS 125 B2 - IAN 100132 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWS 125 B2 - IAN 100132 in the language / languages: English, German, Dutch, Danish, Swedish, Finnish as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PWS 125 B2 - IAN 100132

Parkside PWS 125 B2 - IAN 100132 User Manual - French - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info