595402

Parkside PSBS 240 B2 - IAN 60097 Manual

6
Zoom out
Zoom in
Previous page
1/88
Next page
6
GB IE
Technical specications
Nominal input voltage ........ 230 V~, 50 Hz
Power consumption ..................... 240 W
(S2 30 min)*
Safety class ..........................................I
Mechanical rating .......................... IP 20
Measurement idling speed n
0
.... 2950 min
-1
Grinding disc
Outer diameter ......................Ø 150 mm
Bore hole ..............................Ø 12.7 mm
Thickness .....................................20 mm
Granulation .......................................36
Velocity v
0
...........................max. 23 m/s
Grinding belt
Dimension .........................50 x 686 mm
Granulation .......................................80
Velocity v
0
...................................15 m/s
Weight (incl. accessories) .. approx. 7.1 kg
Sound pressure level
(L
pA
) .....................89 dB(A); K
pA
=3 dB(A)
Sound power level (L
wA
)
measured ..........102 dB(A); K
wA
=3 dB(A)
Vibration total value (a
h
) .......... 2,5 m/s
2
* A break is introduced after 30 minutes of
uninterrupted operating duration until the de-
vice temperature differs 2 K (2°C) less than
room temperature.
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
Technical and optical changes may be
undertaken in the course of further develop-
ment without notice. All dimensions, refer-
ences and information in this instruction
manual are therefore not guaranteed. Legal
claims made on the basis of the instruction
manual can therefore not be considered as
valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning!
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).
Safety Instructions
WARNING!
When using power tools, observe
the following basic safety measures
for the prevention of electric shocks
and the risk of injury and re.
Please read all these instructions
before using the electric tools and
please keep the safety instructions.
… 6 …


Need help? Post your question in this forum.

Forumrules
1

Forum

parkside-psbs-240-b2---ian-60097

Reset search

  • Hi , Where can i get parts for my PSBS 240 C2 . I am wanting nuber 18 / 17 17a . on the manual sheet , Thanks Submitted on 26-8-2023 at 10:58

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PSBS 240 B2 - IAN 60097 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSBS 240 B2 - IAN 60097 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info