576767

Parkside PSBM 500 A2 - IAN 93163 Manual

27
Zoom out
Zoom in
Previous page
1/31
Next page
27 GB
General safety advice for electrical power tools General safety advice for electrical power tools
parts only. This will ensure that your device
remains safe to use.
Q
Safety advice for hammer-
action drills
Use the auxiliary handle supplied with
the device. Loss of control of the tool can
lead to injury.
Always wear ear protection when us-
ing percussion drills. Exposure to noise can
cause hearing loss.
Secure the workpiece. Use clamps or a
vice to grip the workpiece firmly.
If a dangerous situation arises, pull
the mains plug immediately out of the
mains socket.
Always work with the mains lead
leading away from the rear of the
device.
Do not allow the ventilation slots to
become covered while the device is
operating. Do not insert any objects into the
ventilation slots.
DANGER OF FIRE FROM FLYING SPARKS!
Drilling or abrading metal creates flying sparks.
Always make sure that nobody is placed in any
danger and that there are no inflammable ma-
terials near the working area.
HAZARDOUS DUSTS!
Working with harmful / poisonous dusts presents
a danger to health for the tool operator and
any persons in the vicinity.
Wear safety glasses and a dust pro-
tection mask!
Avoid drilling paints containing lead
or other substances hazardous to
health.
Do not drill or abrade materials con-
taining asbestos. Asbestos is a known
carcinogen.
Do not drill moist materials or damp
surfaces.
When working with electrical tools,
hold them firmly in both hands and
make sure that your footing is secure.
Using both your hands to hold electrical tools
ensures safer operation of them.
If the inserted tool jams, switch off the
electrical power tool immediately. Be
prepared for high reaction torques as they may
cause kickback.
Always keep the device clean, dry and
free of oil or grease.
Only handle the electrical tool by
means
of the insulated handling surfaces
when
you are carrying out jobs where the
insertion tool may come into contact
with hidden power supply lines or its
own power cable. Contact with a live elec-
trical wire also makes metal parts of the electrical
tool live and leads to electric shock.
Keep your workplace clean and tidy.
Mixing materials is particularly dangerous. Dust
from light metals can burn or explode.
Wait until the electrical tool has come
to a standstill before putting it down.
The insertion tool could get caught up in some-
thing and this may lead to control of the electrical
tool being lost.
Q
Caution utility services!
DANGER! Ensure that you do not strike
electrical cables, gas or water pipes when
you are working with the electrical power
tool. Check a wall using a suitable detector before
you drill or cut slots.
Q
Original accessories /
attachments
Use only the accessories and attachments
detailed in the operating instructions.
The use of inserted tools or accessories other than
those recommended in the operating instructions
could lead to you suffering an injury.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PSBM 500 A2 - IAN 93163 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSBM 500 A2 - IAN 93163 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PSBM 500 A2 - IAN 93163

Parkside PSBM 500 A2 - IAN 93163 User Manual - Danish, French, Swedish - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info