558819
10
Zoom out
Zoom in
Previous page
1/13
Next page
11 GB/IE/CY
Q
Switching on and off
When operating the hammer-action drill you can
select between intermittent or continuous operation
mode. In either mode the device functions as follows:
To switch on intermittent operation mode:
j Press the ON / OFF switch
6
.
To switch off intermittent operation mode:
j Release the ON / OFF switch
6
.
Switching continuous operation on:
j Press and hold the ON / OFF switch
6
down
and press the locking button
5
.
To switch off continuous operation mode:
j Press and then release the ON / OFF switch
6
.
Q
Infinitely adjustable
speed setting
The ON / OFF switch
6
has a variable speed
control.
j Pressing the ON / OFF switch
6
increases the
speed.
Q
Setting the direction of rotation
j With the rotational direction switch
7
you can
change the rotational direction of the electrical
tool.
NOTE: This is, however, not possible when the
ON / OFF switch
6
is pressed down.
NOTE: Hold the appliance in the direction of work.
Clockwise rotation:
j Push the rotational direction switch
7
to the
right in order to drill and to screw in screws.
Anticlockwise rotation:
j Push the direction of rotation switch
7
to the
left to slacken a screw or screw it out.
Q
Switching between drilling /
hammer-action
Note: The hammer-action drilling mode is intended
for drilling into brick, concrete and stone only.
Note: The drill / hammer-action switch
4
must
only be moved after the device has come to a
standstill.
Drilling:
j Set the drill / hammer-action switch
4
to the
right into the
position.
Impact drilling:
j Set the drill / hammer-action switch
4
to the
left into the
position.
Q
Servicing and cleaning
WARNING!
DANGER OF INJURY!
Switch the device off and pull the plug out of the
mains socket before carrying out any work on the
device.
j Do not allow any liquids to enter the device.
Use a cloth to clean the device.
j Clean the device after you have finished using it.
j Do not under any circumstances use petrol or
strong solvents.
j Store the device in a dry room.
Q
Service centre
WARNING!
Have your device repaired
only by qualified specialist personnel
using original manufacturer parts
only. This will ensure that your device remains
safe to use.
WARNING!
If the plug or mains lead
needs to be replaced, always have
the replacement carried out by the
manufacturer or his service centre. This
will ensure that your device remains safe to use.
First use / Servicing and cleaning / Service centre
35321_IMPACT DRILL_Content_LB6.indd 11 03.09.09 12:03
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PSBM 500 - KH 3035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSBM 500 - KH 3035 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PSBM 500 - KH 3035

Parkside PSBM 500 - KH 3035 User Manual - German, Dutch, French - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info