Manual Parkside PNS 300 A1 - IAN 302394 (page 5 of 24) (English)

679111

Zoom out

Zoom in

1/24

PNS 300 A1

■2

│

2-SPEED CORDED POWER DRILL

PNS 300 A1

Introduction

Congratulations on the purchase of your new appli-

ance. You have chosen a high-quality product. The

operating instructions are part of this product. They

contain important information about safety, usage

and disposal. Before using the product, please

familiarise yourself with all operating and safety

instructions. Use the product only as described and

for the range of applications speciﬁed. Please also

pass these operating instructions on to any future

owner.

Intended use

This appliance is intended for screwing and un-

screwing screws and drilling into wood, metals

and plastics.

Use this product only as described and for the

areas of applications speciﬁed. The appliance is

not intended for commercial use. Any other usage

or modiﬁcation of the appliance is deemed to be

improper and carries a signiﬁcant risk of accidents.

The manufacturer accepts no responsibility for

damage attributable to misuse.

Features

Speed selector switch

Cover for carbon brushes

Rotation direction switch/lock

Locking button

ON/OFF switch / speed control

Torque selection ring

Bit holder

Chuck ring

Chuck

Bit

Package contents

1 2-SPEED CORDED POWER DRILL PNS 300 A1

1 bit (50 mm)

1 set of operating instructions

Technical data

Rated power

consumption: 300 W

Rated voltage: 230 V ∼ 50 Hz

(AC)

Gearbox: 2-speed gearbox

Rated idle speed: 1st gear: n

0–400 rpm

2nd gear: n

0–1600 rpm

Max. torque: 40 Nm

Torque levels: 1–22 + 1 drill setting

Chuck capacity:

: max. Ø 10 mm

Max. drill diameter: 25 mm for wood

10 mm for steel

Protection class: II /

(double insulation)

Noise emission value:

Noise measurement value determined in accordance

with EN 60745. The A-rated noise level of the

power tool is typically as follows:

Sound pressure level: L

= 81.2 dB (A)

Uncertainty K: K

= 3 dB

Sound power level: L

= 92.2 dB (A)

Uncertainty K: K

= 3 dB

Vibration emission value:

Total vibration values (vector total of three direc-

tions) determined in accordance with EN 60745:

Drilling in metal:

h,D

= 3.758 m/s

Uncertainty K = 1.5 m/s

Idle speed/max. speed:

= 0.697 m/s

Uncertainty K = 1.5 m/s

Wear hearing protection!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PNS 300 A1 - IAN 302394 in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PNS 300 A1 - IAN 302394

Parkside PNS 300 A1 - IAN 302394 User Manual - German, Dutch, French - 38 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PNS 300 A1 - IAN 302394 Manual

Product: