Manual Parkside PKGS 1450 Laser - KH 3175 (page 4 of 14) (English)

679031

Zoom out

Zoom in

1/14

Introduction

Chop and mitre saw

PKGS 1450 LASER

Chop, mitre and combination cuts

L Introduction

L Your safety

Please make sure you familiarise yourself

fully with the way the device works before

you use it for the ﬁrst time and that you

understand how to handle electrical power tools

correctly. Further details can be found in the operating

instructions.

In addition, you must also observe the general safety

advice contained in the accompanying booklet. Keep

these instructions in a safe place. If you pass the

device on to anyone else, please ensure that you

also pass on all the documentation.

Proper use

For sawing solid wood, chipboard and plastic. With

the laminate cutting attachment

{

in place the

machine is suitable for laminate and material up to

20 cm wide. Please note that the blade pre-installed

in the saw as supplied is intended for use with wood

only. Any other use or modiﬁcation to the device shall

be considered as improper use and could give rise

to considerable dangers. The manufacturer will not

accept liability for loss or damage arising from

improper use. Not suitable for commercial use.

Features and equipment

Saw motor unit

Switch handle

Safety lever

Sliding roller (with automatic blade guard)

Saw table

Lateral support stirrup

Lateral support stirrup clamp screws

Mitre angle stop

Saw table setting knob

Mitre angle scale

{

Laminate cutting attachment

}

Mounting holes

Stop plate

Saw motor unit setting knob

Rear support stirrup

Sawdust removal connector

Laser beam emission opening

Screw (for attaching the saw blade)

Outside ﬂange

Laser On / Off switch (Fig. C)

Transport lock (Fig. A)

Saw blade depth setting screw (Fig. A)

[

Scale on the saw motor unit (Fig. A)

]

Mitre angle / 0° setting screw (Fig. A)

Saw motor unit mounting screws (Fig. A)

Mitre angle / 45° setting screw (Fig. B)

On / Off switch (Fig. C)

Rotation speed selector wheel (Fig. C)

Table insert (Fig. B)

Laser setting screw (Fig. B)

Included items

1 Chop and mitre saw

1 Laminate cutting attachment

{

2 Lateral support stirrups

1 Sawdust collection bag (a)

2 Screw clamps (b)

2 Carbon brushes (c) (see section on maintenance)

2 Allen keys (d), sizes 5 mm and 6 mm

1 Locking spanner (e)

1 Socket spanner (13 mm) (f)

1 Universal saw blade: 250 x 30 x 2.35 mm,

80 HM - teeth (3.2 mm)

1 Saw blade for wood

(supplied installed): 250 x 30 x 1.8 mm,

36 HM - teeth (3.0 mm)

1 Operating instructions

1 Booklet “Guarantee and service”

1 Booklet “Containing general safety advice”

6 GB/IE

Hallo, mijn naam is Bram Hexspoor en ben op zoek naar een tandwiel met schroef voor het bevestigen van het zaagblad.Bj. 2003
Hij zit bevestigd aan de motor
Het is een PARKSIDE TYP. PKGS 1450 afkortzaag met slive. Submitted on 12-12-2021 at 04:58
Reply Report abuse
CAN I REPLACE THE LASER ON MY CHOP AND MITRE SAW IF SO WERE DO I GET ONE THANKS Submitted on 30-12-2020 at 14:45
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKGS 1450 Laser - KH 3175 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PKGS 1450 Laser - KH 3175

Parkside PKGS 1450 Laser - KH 3175 User Manual - German - 14 pages

Parkside PKGS 1450 Laser - KH 3175 User Manual - Dutch - 14 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PKGS 1450 Laser - KH 3175 Manual

Product: