595405
37
Zoom out
Zoom in
Previous page
1/39
Next page
37 GB
Screw on a new backing plate
6
clockwise
until tight while holding the open-ended span-
ner
11
still against this movement.
Cleaning
RISK OF INJURY! Be
absolutely certain to disconnect the device
from the compressed air source before clean-
ing or maintaining it.
Clean the air sander after you have finished
using it.
Store the air sander in dry enclosed rooms only.
Use a dry cloth to clean the device. Under no
circumstances should you use petrol, solvent or
cleaners which attack plastic.
Keep the ventilation openings clear at all times.
Remove abrasive dust with a brush.
Information about warranty
and service processing
Creative Marketing Consulting GmbH
warranty
Dear customer, the warranty for this device is 3
years from the date of purchase. In the event of
product defects you have legal rights against the
retailer of this product. Your legal rights are not li-
mited in any way by our warranty detailed below.
Warranty terms
The warranty period begins on the date of purchase.
Please keep the original sales receipt in a safe lo-
cation. This document is required as your proof of
purchase.
Should this device show any fault in materials or
manufacture within three years from the date of
purchase, we will repair or replace it - at our choice -
free of charge to you. Warranty services require
the defective device and the proof of purchase (sales
receipt) to be presented within the three-year period
along with a brief written description of the defect
and when it occurred.
If the defect is covered by our warranty, we will re-
turn the repaired device or replacement thereof. A
repair or exchange of the device does not extend a
new warranty period.
Scope of warranty
The device has been manufactured to strict quality
guidelines and meticulously examined before delivery.
The warranty applies to faults in material or manuf-
acture. This warranty does not apply to product
parts
subject to normal wear and tear and which can the-
refore be considered as wear items, or to damage
to fragile parts, e.g. switches, storage batteries or
glass parts.
This warranty becomes void if the device has been
damaged or improperly used or maintained. All in-
structions provided in the operating instructions must
be followed strictly to constitute proper use of the
product. Applications and actions which the opera-
ting instructions warn of or advise against must be
avoided without fail.
This product is intended for private, non-commercial
use only. The warranty is void in the case of inap-
propriate and improper handling, use of force and
of any intervention which was not carried out by
our authorized service branch.
Processing of warranty claims
Please follow the instructions below to ensure quick
processing of your matter:
When inquiring about your product please have
your receipt and product number (e.g. IAN) ready
as your proof of purchase.
The item number can be found on the type plate,
engraving, the cover page of your instructions
(bottom left) or the decal at the back or bottom.
Working … / Cleaning / Information about warranty and service processing
Before Initial Use / Initial use / Working instructions
96905_par_Druckluft_Exzenterschleifer_content_DE_AT_NL.indd 37 30.04.14 15:46
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PDEXS 150 A1 - IAN 96905 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDEXS 150 A1 - IAN 96905 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PDEXS 150 A1 - IAN 96905

Parkside PDEXS 150 A1 - IAN 96905 User Manual - Danish, French, Swedish, Finnish - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info