679211
11
Zoom out
Zoom in
Previous page
1/44
Next page
11 GB/IE
Start-up / Maintenance and Cleaning / Service / Warranty
Selecting the direction
Select the direction of rotation by setting the direction
switch
2
.
Only use / adjust the rotation
switch
2
with the device stopped.
Switching on and off
Switching on the device:
Press the ON / OFF switch
3
.
Switching the device off:
Release the ON / OFF switch
3
.
Activating permanent operation:
Press the ON / OFF switch
3
and lock whilst
pressed using the ON / OFF switch locking
button
4
.
Deactivating permanent operation:
Press and release the ON / OFF switch
3
.
Presetting the speed
The speed dial
3 a
allows you to adjust the operati
ng
speed to specific speeds.
Which speed is most suitable depends on the
material you will be working on. We recommend
testing the speed to determine the correct setting.
Tip: These two basic rules about speeds are always
helpful:
1. larger bore diameter = lower speed and vice
versa, smaller bore diameter = higher speed
2. hard material = low speed
Maintenance and Cleaning
RISK OF INJURY! Switch the
device off and unplug from the mains socket before
performing any work on the device.
Always keep the device clean, dry and free of
oil or grease.
Do not allow liquids to enter the hammer drill.
Use a dry cloth to clean the housing.
Regularly clean the tool holder
8
.
CAUTION! PRETENSION! Pull the locking
sleeve
10
back and release the dust cap
9
.
Clean and grease components.
Service
Have your appliance
repaired by qualified professionals
using OEM parts only. This will maintain
the safety of the device.
If the connection cable needs
to be replaced, this repair must be performed
by the manufacturer or a representative to pre-
vent safety hazards.
Note: Spare parts not listed (e.g. carbon brushes,
switches) can be ordered through our call centre.
Warranty
The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care
and meticulously examined before deliv-
ery. Please retain your receipt as proof
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. Only in this
way can a post-free despatch for your
goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for pri-
vate use only and is not intended for commercial use.
The warranty is void in the case of abusive and im-
proper handling, use of force and internal tamper-
ing not carried out by our authorized service branch.
Your statutory rights are not restricted in any way
by this warranty.
Start-up
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PBH 1050 B2 - IAN 273100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PBH 1050 B2 - IAN 273100 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info