576742
24
Zoom out
Zoom in
Previous page
1/28
Next page
21
PASS 3.6 B2
GB
Switch off the power tool immediately if the
tool being used gets blocked. Be prepared
for high reaction moments as these can cause
kick-back.
Hold power tool by insulated gripping surfaces,
when performing an operation where the
fastener may contact hidden wiring or its
own cord. Fasteners contacting a “live” wire may
make exposed metal parts of the power tool
“live” and could give the operator an electric
shock.
When working on the appliance, as well as
during transport and storage, always place
the rotation direction switch in the middle
position (locked). This will prevent unintentional
activation of the device.
This appliance is not intended for use by people
(including children) with reduced physical,
sensory or mental abilities or for those without
experience and/or knowledge, unless they are
supervised by a person responsible for their
safety or they have been instructed in its use.
Children should be supervised to ensure that
they do not play with the appliance.
Original accessories/additional
equipment
Use only the additional equipment and acces-
sories detailed in the operating instructions.
The use of tools and accessories other than
those recommended in the operating instruc-
tions could lead to an increased risk of personal
injury for you.
Initial operation
Charging the appliance
Only for interior use!
NOTE
The battery is supplied partially charged.
Before fi rst use, charge the battery for at least
3 hours. Li-ion batteries can be charged at
any time without adversely aff ecting their
service life. Interruption of the charging
process will not damage the battery.
Start charging:
Connect the charger to a 230 V
~
50 Hz
power source.
Connect the charger to the charging socket
on the appliance.
The battery is fully charged when the battery level
display
changes from red to green.
Stop charging:
Disconnect the charger from the mains
power supply.
Disconnect the charger from the charging
socket
on the appliance.
Changing bits / screwdriver bits
Inserting:
Pull back the locking collar and hold it fi rmly.
Insert the bit into the tool holder and let go
of the locking collar .
Removing:
Pull back the locking collar and hold it fi rmly.
Remove bit and let go of the locking collar .
Operation
Switching the cordless screwdriver
on / off
Switching on:
Press the ON/OFF switch and keep it
pressed in.
Switching off :
Release the ON/OFF switch .
Changing the direction of rotation
Clockwise:
Push the rotation direction switch to the left.
Press the ON/OFF switch . You can now
screw in the screws.
IB_96266_PASS3.6B2_LB1.indb 21IB_96266_PASS3.6B2_LB1.indb 21 23.12.13 17:0423.12.13 17:04
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PASS 3.6 B2 - IAN 96266 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PASS 3.6 B2 - IAN 96266 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PASS 3.6 B2 - IAN 96266

Parkside PASS 3.6 B2 - IAN 96266 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info