Manual Parkside IAN 73791 PDMT 6.2 A1 (page 42 of 44) (English, German, Dutch)

745111

Zoom out

Zoom in

1/44

42 GB

… / Environmental instructions and disposal … / EC Declaration of Conformity

Troubleshooting / Information about warranty and service processing

Fault Housing heats up

during use

Cause Solution

1. Improper lubri-

cation or insuﬃcient

lubricant

Lubricate equipment as

instructed.

2. Worn parts

Have your equipment in-

spected by a qualiﬁed

technician.

After any maintenance verify that the equip-

ment is still operating as it was doing originally.

Information about warranty

and service processing

Creative Marketing Consulting GmbH

warranty

Dear customer, the warranty for this device is 3

years from the date of purchase. In the event of

product defects you have legal rights against the

retailer of this product. Your statutory rights are not

restricted in any way by our warranty, which is de-

tailed below.

Warranty terms

The warranty period begins on the date of purchase.

Please keep the original sales receipt in a safe lo-

cation. This document is required as your proof of

purchase.

Should this device show any fault in materials or

manufacture within three years from the date of

purchase, we will repair or replace it - at our choice -

free of charge to you. Warranty services require

the defective device and the proof of purchase

(sales receipt) to be presented within the three-year

period along with a brief written description of the

defect and when it occurred.

If the defect is covered by our warranty, you will re-

ceive the repaired device or replacement in return.

A repair or exchange of the device does not extend

the warranty period or start a new warranty period.

Scope of warranty

The appliance has been manufactured to strict

quality guidelines and meticulously examined be-

fore delivery.

The warranty applies to faults in material or manu-

facture. This warranty does not apply to product

parts subject to normal wear and tear and which

can therefore be considered as wear items, or to

damage to fragile parts, e.g. switches, storage bat-

teries or glass parts.

This warranty becomes void if the appliance has

been damaged or improperly used or maintained.

All instructions provided in the operating instructions

must be followed strictly to constitute proper use of

the product. Purposes and practices which the op-

erating instructions warn of or advise against must

be avoided without fail.

This product is intended for private, non-commercial

use only. The warranty is void in the case of inap-

propriate and improper handling, use of force and

of any intervention which was not carried out by

our authorised service branch.

Processing of warranty claims

Please follow the instructions below to ensure quick

processing of your claim:

When inquiring about your product please have

your receipt and product number (e.g. IAN) ready

as your proof of purchase.

The product number can be found on the type plate,

an engraving, the cover page of your instructions

(bottom left) or the decal at the back or bottom.

In the event of malfunctions or other defects please

ﬁrst contact the service department below by phone

or e-mail.

A product recorded as defective, along with the

proof of purchase (sales receipt) and a description

73791_Druckluft-Multitool_content_LB1 (nur NL).indd 42 11.05.12 17:56

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 73791 PDMT 6.2 A1 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 3,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 73791 PDMT 6.2 A1 Manual

Product: