Manual Parkside IAN 310867 PESG 120 B4 (page 27 of 72) (English, German, Dutch, French)

749292

Zoom out

Zoom in

1/72

27 GB/IE

Safety instructions / Assembling the welding shield / Preparing to weld

burns all over the body with the

appropriate clothing and face

protection. Remember the follow-

ing steps:

- Put on protective clothing before

welding.

- Put on gloves.

- Open windows or use vent to

ensure air supply

Wear safety goggles and a mask.

Wear gauntlet gloves made

from suitable material (leather)

on both hands. These must be

in good condition.

Wear suitable aprons to protect

the clothing from sparks and

burns. When required based on

the working method, e.g. weld-

ing overhead, wear a protective

suit and, if necessary, a head

guard.

Protecting against

rays and burns

Mark the work area with a sign

“Danger! Do not look into

ﬂames!“ to indicate the risk to

the eyes. If possible, shield the

work areas to protect persons

nearby. Keep unauthorised per-

sons away from the welding area.

Walls in the direct vicinity of

ﬁxed work areas should be nei-

ther light coloured nor glossy.

Protect windows against rays

passing through or reﬂecting at

a minimum to head height, e.g.

with suitable paint.

Assembling the welding shield

Attach the handle 8 to the welding shield 7

as shown in Fig. B.

Install the protective glass 10 to the welding

shield 7 as shown in Fig. B.

Preparing to weld

Note: When activating the power verify the current

indicator moves and the lead screw is not jammed.

Note: If the tensioning force of the electrode

holder 5 and the earth terminal 4 subsides,

replace immediately.

Connect the electric cables.

Set the ON / OFF switch 2 to the “ON“ posi-

tion. The current indicator will light up when

operation starts.

To end operation, set the ON / OFF switch 2

to the auf “OFF“ position.

Note: The yellow indicator light 6 lighting

up indicates overheating. The electric circuit will

automatically be broken. Operation will end.

Attach the earth terminal 4 directly to the

work piece or to the pad on which the work

piece is placed.

Note: Ensure direct contact to the work piece.

Thus avoid painted surfaces and / or insulation.

Note: Always use the welding shield 7 whilst

welding. It protects the eyes from the light beam

Safety instructions

emitted by the arc, yet allows for a clear view

of the work piece.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 310867 PESG 120 B4 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 310867 PESG 120 B4 Manual

Product: