Manual Parkside IAN 310867 PESG 120 B4 (page 21 of 72) (English, German, Dutch, French)

749292

Zoom out

Zoom in

1/72

21 GB/IE

Introduction / Safety instructions

Arc welder PESG 120 B4

Introduction

Congratulations! You have

chosen a high-quality device

from our company. Familiarise

yourself with the product before using it for the ﬁrst

time. In addition, please carefully refer to the oper-

ating instructions and the safety advice below. Initial

operation of this tool must be performed by trained

personnel.

KEEP OUT OF THE REACH OF CHILDREN!

Intended use

This electric welding equipment is suitable for

manual arc welding using the appropriate coated

electrodes. Improper product handling can be dan-

gerous to persons, animals and objects. Only use

the welding shield with welding glass and protec-

tive glass overlay marked accordingly, and only for

welding. The welding shield is not suitable for laser

welding! Only use the product as described and

for the indicated purpose. Keep these instructions in

a safe place. When passing this product on to others,

please also include all the documents. Any use other

than the intended is prohibited and potentially dan-

gerous. Damages resulting from noncompliance or

misuse are not covered by the warranty and are not

included in the manufacturer‘s liability. This device

has been designed for household use and may not

be used for commercial or industrial purposes.

Parts description

Electric Welding Equipment

1 Handle

2 ON / OFF switch

3 Hand wheel

4 Earth terminal

5 Electrode holder

6 Overheating control lamp

Welding shield

7 Welding shield

8 Handle

9 Brush

10 Protective glass

Technical Data

Mains connection: 230 V∼ 50 Hz

Max. welding current

and the respective

conventional load voltage: 75 A /

21 V-100 A / 22 V

Rated value

of the mains current: U1: 230 V

Highest rated value

of the mains current: I1max: 22.5 A

Maximum eﬀective

input current: I1eﬀ: 7 A

Rated value of the

no-load voltage: U0: 48 V

Protection type: IP21S

Scope of delivery

1 Arc welder

1 Welding shield

2 Welding cables

1 Combination wire brush with chipping hammer

1 Instructions for assembly and use

Safety instructions

Please carefully read the instructions

for use and follow the speciﬁed no-

tices. Familiarise yourself with the

equipment, its proper use and the

safety notices using these instructions

for use. The nameplate contains all

the technical data for this welding

List of pictograms used

5 Welding electrodes (2x 1.6mm /

2x 2mm / 1x 2.5mm)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 310867 PESG 120 B4 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 310867 PESG 120 B4 Manual

Product: