745529
5
Zoom out
Zoom in
Previous page
1/70
Next page
2 
GB
IE
PHKS 1350 B2
CIRCULAR SAW PHKS 1350 B2
Introduction
Congratulations on the purchase of your
new appliance. You have selected a high-
quality product. The operating instructions
are part of this product. They contain important in-
formation about safety, use and disposal.
Before using the product, familiarise yourself with
all operating and safety instructions. Use this product
only as described and only for the specified areas
of application. Please also pass these operating
instructions on to any future owner(s).
Proper use
This circular saw (hereinafter "appliance") is
designed for longitudinal, cross and mitre cuts in
firmly supported solid wood, chipboard, plastics
and lightweight construction materials. Any other
uses of or modifications to the device are deemed
to be improper usage and may result in serious
physical injury. Not for commercial use.
Features
Safety lock-out
ON/OFF switch
Cutting depth scale
Allen key SW 6
Locking screw
Base plate
Guide fence slot
Wing screw for guide fence slot
Wing screw for cutting angle preselector
Cutting angle scale
Spindle lock
Auxiliary handle
ON/OFF switch laser
Laser discharge opening
Guide fence
Clamping flange
Clamping screw/plain washer
Blade guard
Release lever for the blade guard
Saw blade
Chip ejector
Vacuum adapter for dust extraction
Rotational speed preselector adjusting wheel
Battery compartment cover
Package contents
1 circular saw
1 guide fence
1 vacuum adapter for dust extraction
1 Allen key SW 6
2 saw blades
2 batteries
1 operating instructions
Technical details
Nominal power input: 1350 W
Rated voltage: 230 V ∼ 50 Hz
(Alternating current)
Idle speed: n
0
2.200–4.700 rpm
Saw blades: 1x Ø 190 mm x 2.5 mm x
Ø 20 mm, 24 teeth
1x Ø 190 mm x 2.5 mm x
Ø 20 mm, 48 teeth
Max. cutting depth: at 0°:
wood/plastic 65 mm
at 45°:
wood/plastic 44 mm
Protection class: II /
(Double shielded)
Noise and vibration data:
Noise measurement determined in accordance
with EN 60745. The A-rated noise level of the
tool is typically:
Noise emission value:
Sound pressure level: L
PA
= 92 dB(A)
Uncertainty: K
PA
= 3 dB
Sound power level: L
WA
= 103 dB(A)
Uncertainty: K
WA
= 3 dB
190mm
max. 56 mm
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 273331 PHKS 1350 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 273331 PHKS 1350 B2 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info