Manual Parkside IAN 270420 PHKSA 18 Li B2 (page 40 of 44) (French)

745234

Zoom out

Zoom in

1/44

PHKSA 18-Li B2

Fig. B: Cutting width 3 cm

♦ Retighten the wing screw .

Connecting the sawdust extraction

device

♦ Attach the dust extraction adapter to the chip

ejector .

Optional depending on the diameter of the dust

and sawdust extractor.

♦ Connect an approved dust and chip extraction

device.

Operation

Switching on and oﬀ

Switching on:

♦ Push the safety lock-out to the left or right

and keep it pressed.

♦ Press the ON/OFF switch . Once the saw is

running, you can release the safety lock-out .

Switching oﬀ:

♦ Release the ON/OFF switch

Setting the cutting angle

You can select the cutting angle using the cutting

angle scale .

■ Release the wing screw on the cutting angle

preselector, set the desired cutting angle on the

cutting angle scale

and then retighten the

wing screw

Setting the cutting depth

NOTE

► Select a cutting depth of approx. 3 mm more

than the thickness of the material. This ensures

that you achieve a clean cut.

♦ Release the locking screw

, set the desired

cutting depth on the cutting depth scale and

then retighten the locking screw .

Working with the circular saw

1. Switch on the appliance – as described in

“Switching on and oﬀ” – and then place it with

the front edge of the base plate on the

material.

2. Align the machine using the guide fence

by using a marked line.

3. Hold the machine in both hands using the handles

and saw by exerting an even pressure.

Switching the laser on and oﬀ

Switching on:

♦ Press the laser ON/OFF/RESET switch

Switching oﬀ:

♦ Press the laser ON/OFF/RESET switch

NOTE

► OVERLOAD AND RESET! The appliance

switches oﬀ in case of overload operation.

♦ Switch OFF the laser. Press the laser ON/

OFF/RESET switch

► An automatic reset is only possible once the

laser is turned oﬀ.

Tips and tricks

■ Avoid damaging the cutting edge of sensitive

materials, e.g. coated chip boards or doors,

by sticking masking tape along the cutting line.

Another beneﬁt of this is that it is easier to mark

a line on the tape than on a shiny surface. An

even more eﬀective method of protecting the

cutting edges is to clamp a thin piece of wood

along the cutting line (this wood is also sawn).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 270420 PHKSA 18 Li B2 in the language / languages: French as an attachment in your email.

The manual is 0,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 270420 PHKSA 18 Li B2

Parkside IAN 270420 PHKSA 18 Li B2 User Manual - English, German, Dutch, Danish - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 270420 PHKSA 18 Li B2 Manual

Product: