745230
5
Zoom out
Zoom in
Previous page
1/64
Next page
2
PMFS 200 A1
GB
IE
3-IN-1 MULTI-PURPOSE SANDER
PMFS 200 A1
Introduction
Congratulations on the purchase of your
new appliance. You have selected a
high-quality product. The operating
instructions are part of this product. They contain
important information on safety, usage and
disposal. Before using the product, familiarise
yourself with all handling and safety guidelines.
Use the product only as described and for the
range of applications specified. Please also pass
these operating instructions on to any future owner.
Intended use
Depending on the sandpaper being used, this
appliance is suitable for the dry sanding of wood,
plastic, metal, filler and also painted surfaces.
The appliance is particularly suitable for corners,
edges and hard-to-reach areas. Any other usage of
or modification to the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) resulting from improper usage. This ap-
pliance is not intended for commercial use.
Features
ON/OFF switch
Adaptor fitting
Reducer for external extraction appliance
Power cord
Tab (dust box)
Dust collection box
Release button for dust box
Clamping lever
Orbital sander plate
Clamping rails
Triangular sander plate
Screws (8x)
Random orbital sander plate
Speed selector
Rubber pin (8x)
Package contents
1 3-in-1 multi-purpose sander PMFS 200 A1
1 Random orbital sander plate with Velcro
fastener
1 Orbital sander plate with Velcro fastener
1 Triangular sander plate with Velcro fastener
2 Random orbital sander sheets (grain size
80/240)
2 Orbital sander sheets (grain size 80/240)
2 Triangular sander sheets (grain size 80/240)
1 Dust box
1 Reducer for external extraction appliance
8 Rubber pins (4x pre-installed)
8 Screws (4x pre-installed)
1 Operating instructions
Technical data
Nominal power input: 200 W
Rated voltage: 230 V ~ 50 Hz
Nominal speed: n
0
7000–12000 rpm
Nominal oscillation speed: n
0
14000–24000 rpm
Protection class:
II /
Noise and vibration data:
Noise measurement value determined in accord-
ance with EN 60745. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level L
PA
: 76 dB(A)
Sound power level L
WA
: 87 dB(A)
Uncertainty K: 3 dB(A)
Wear hearing protection!
Weighted acceleration, typically:
Hand/arm vibration a
h
= 11.5 m/s
2
Uncertainty K = 1.5 m/s
2
NOTE
The vibration level specified in these instructions
has been measured in accordance with the
standardised measuring procedure speci-
fied in EN 60745 and can be used to make
equipment comparisons. The specified vibration
emission value can also be used to make an
initial exposure estimate.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 115767 PMFS 200 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 115767 PMFS 200 A1 in the language / languages: English, German, Dutch, Danish, Swedish as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info