568707
1
Zoom out
Zoom in
Previous page
1/2
Next page
Remote ControlWhat’s in the box . . .
Soundbar power
cord (2 pieces)
Soundbar
Removable grille
Soundbar feet
‘AAA’ batteries for remote
Mute
Volume Down
Volume Up
Play/Pause
Next Track Previous Track
Enable
Bluetooth
Source
Power On/O
Soundbar on-wall brackets
Subwoofer feet and screws
Subwoofer
with cradle
(Adaptor for use when sub
is in horizontal position,
wired connection only)
#2 Phillips (not supplied)
Remote
110413
Set-Up Guide
The Ocial Sound of YOU
Subwoofer
power cord
Optical cable
(digital)
A
Dual RCA cable
(analog)
B
C
D
Your Soundtrack 2 System is capable of
learning codes from remote controls you are
using for other sources. See manual for details.
ATTENTION: remove
protective end caps
Music Mode*
* Sonic enhancements
to listening experience
according to mode
Movie Mode*
Greyed out buttons do
not apply to this model
FUNCTION AND OPERATION
System OFF: Press POWER
System ON: Press POWER
Auxiliary 3.5 mm Stereo Source:
Press SOURCE once
Analog RCA Source: Press SOURCE a second time
Digital Optical Source: Press SOURCE a third time
Bluetooth Wireless Connection: Press SOURCE
a fourth time (see Bluetooth connection for details)
Wireless Soundbar / Subwoofer Connection: Press SYNC.
LED ashes and stops ashing once there is a connection
Volume Up/Down: Press UP ARROW or DOWN ARROW
Max Volume: When volume is set to maximum level
the LED brightness increases and ashes rapidly
Min Volume: When volume is set to minimum level
the LED brightness increases and ashes rapidly
LED
Bluetooth Connection
1. FIRST TIME CONNECTION: To connect a phone/tablet that HAS NEVER
been connected to the Soundtrack 2, press the Enable Bluetooth
button on your remote or press the Source button (multiple times if
necessary) on the top-panel of the soundbar until the soundbar LED
rapidly ashes RED then BLUE ( ). The connection
process will take approximately 1 minute. See Step 2.
PREVIOUSLY CONNECTED: If your phone/tablet HAS previously
been connected to Soundtrack 2, the LED will ash RED then
BLUE ONCE ( ). Select Bluetooth as your playback
option and skip step 2.
2. While the LED on the soundbar alternates between RED and BLUE
( ), enable Bluetooth on your phone/tablet and search for
“Soundtrack 2” on your Bluetooth device list. Select “Soundtrack 2” to
establish a connection. Once a connection is established, the LED
illuminates Solid Blue ( ). Depending on phone/tablet you may
need to change the playback device to “Soundtrack 2” or it may
change automatically.
x1
x2
x1 x1
x3
-
+
-
+
rapid
rapid
rapid
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks
of Dolby Laboratories.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by Paradigm Electronics Inc. is under license.
The “aptX® software is copyright CSR plc or its group companies. All rights reserved. The aptX®
mark and the aptX logo are trade marks of CSR plc or one of its group companies and may be
registered in one or more jurisdictions.”
For more information visit paradigm.com/shift
MODE
Functions and LED Indication
MODE
EN_Soundtrack_2_Set-Up_Guide.indd 1 13-11-04 5:18 PM
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paradigm Soundtrack 2 System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paradigm Soundtrack 2 System in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Paradigm Soundtrack 2 System

Paradigm Soundtrack 2 System User Manual - English, French, Spanish - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info