Manual Pangao PG-IRT1603 (page 9 of 10) (English)

731739

Zoom out

Zoom in

1/10

15 16

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic

propagation is affected by absorption and reflection from structures,

objects and people.

a The ISM (industrial, scientific and medical) bands between 0,15 MHz

and 80 MHz are 6,765 MHz to 6,795 MHz; 13,553 MHz to 13,567 MHz;

26,957 MHz to 27,283 MHz; and 40,66 MHz to 40,70 MHz. The amateur

radio bands between 0,15 MHz and 80 MHz are 1,8 MHz to 2,0 MHz,

3,5 MHz to 4,0 MHz, 5,3 MHz to 5,4 MHz, 7 MHz to 7,3 MHz, 10,1 MHz

to 10,15 MHz, 14 MHz to 14,2 MHz, 18,07 MHz to 18,17 MHZ, 21,0

MHz to 21,4 MHz, 24,89 MHz to 24,99 MHz, 28,0 MHz to 29,7 MHz and

50,0 MHz to 54,0 MHz.

b The compliance levels in the ISM frequency bands between

150 kHz and 80 MHz and in the frequency range 80 MHz to 2,7

GHz are intended to decrease the likelihood that mobile/portable

communications equipment could cause interference if it is

inadvertently brought into patient areas. For this reason, an

additional factor of 10/3 has been incorporated into the formulae

used in calculating the recommended separation distance for

transmitters in these frequency ranges.

c Field strengths from fixed transmitters, such as base stations for

radio (cellular/cordless) telephones and land mobile radios, amateur

radio, AM and FM radio broadcast and TV broadcast cannot be

predicted theoretically with accuracy. To assess the electromagnetic

environment due to fixed RF transmitters, an electromagnetic site

survey should be considered. If the measured field strength in the

location in which the Model PG-IRT1603 Infrared Thermometer is

used exceeds the applicable RF compliance level above, the Model

PG-IRT1603 Infrared Thermometer should be observed to verify

normal operation. If abnormal performance is observed, additional

measures may be necessary, such as re-orienting or relocating the

Model PG-IRT1603 Infrared Thermometer.

d Over the frequency range 150 kHz to 80 MHz, field strengths should

be less than 3 V/m.

Guidance and manufacturer’s declaration – electromagnetic

immunity

The is intended for use

in the electromagnetic environment specified below. The customer

or the user of the Model PG-IRT1603 Infrared Thermometer should

assure that it is used in such an environment.

Model PG-IRT1603 Infrared Thermometer

Immunity

test

IEC 60601

test level

Compliance

level

Electromagnetic environment

- guidance

Conducted

RF IEC

61000-4-6

3 Vrms150

kHz to 80

MHz 6 Vrms

150 kHz to

80 MHz

outside ISM

bandsa

N/A

Portable and mobile RF

communications equipment

should be used no closer to any

part of the Model PG-IRT1603

Infrared Thermometer, including

cables, than the recommended

separation distance calculated

from the equation applicable to

the frequency of the transmitter.

Recommended separation

distance

5.3

Radiated

RF IEC

61000-4-3

10 V/m

80 MHZ to

2.7 GHz

10 V/m

5.3

80MHz to 800MHz

800MHz to 2.7GHz

where P is the maximum output

power rating of the transmitter

in watts (W) according to the

transmitter manufacturer and d

is the recommended separation

distance in metres(m).

Field strengths from fixed RF

transmitters, as determined

by an electromagnetic site

survey, should be less than

the compliance level in each

frequency range

Interference may occur in the

vicinity of equipment marked

with the following symbol:

HOW TO CHANGE THE BATTERIES IN THE BOOMCARE PG-IRT 1603 UNIT? Submitted on 5-5-2022 at 14:40
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pangao PG-IRT1603 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pangao PG-IRT1603 Manual

Product: