602937
21
Zoom out
Zoom in
Previous page
1/22
Next page
FAQs, etc.
40 41
Problem Actions
On screen messages (SD Card)
Frequently Asked Questions / On screen messages
Sound HDMI
No sound is produced
Is "Sound Mute" active? (p. 7)
Is the volume set to the minimum?
Sound level is low
or sound is distorted
Sound signal reception may be deteriorated.
Set "NICAM" (p. 19) in the Sound menu to "Off".
Sound is unusual
Set the sound setting of the connected equipment to "2ch L.PCM".
Check the "HDMI1 input" setting in the Sound menu.
(p. 19)
If digital sound connection has a problem, select
analogue sound connection. (p. 19)
Pictures from external equipment
are unusual when the equipment
is connected via HDMI
Is the HDMI cable connected properly? (p. 34)
Turn Off the TV unit and equipment, then turn them On again.
Check an input signal from the equipment. (p. 37)
Use an equipment compliant with EIA/CEA-861/861B.
The SD card cannot be used
even when it is formatted
Contact the authorized Service Centre.
"Control with HDMI"
function does not work
Switch the TV unit on again with the equipment on.
Set "Control with HDMI" to "Off", then set to "On" again. (p. 32)
Problem Actions
On screen messages Actions / Meanings
On screen messages
All tuning data will be erased
"Shipping condition" will erase all tuning data.
Are you sure ?
Make sure the operation is with your desire.
Recording stopped - TV source changed
Direct TV recording will stop if channel or input source is changed.
Recording in progress
The recording equipment is recording the programme signal from
its own tuner. You can turn the TV off and leave the equipment
recording in the normal way.
Please wait.
A function is in progress.
Please check settings and connections on
HDMI devices.
Communication error in Control with HDMI function (p. 32).
No recording - UNKNOWN REASON
The recording cannot be done by any reason. Check the equipment.
Disc or tape may be full.
No recording -Check Tape or Disc
The tape or disc may be "write protected", missing or damaged.
The equipment may already be recording.
Incorrect PIN Number
The PIN number you entered is wrong.
Feature not available
Check the Q-Link connection and setting (p. 30).
The impossible source (Component / HDMI / PC) to be record.
DOWNLOAD IN PROGRESS PLEASE WAIT
Q-Link channel download is in progress.
No signal can be found in Auto setup.
No stations found
Please insert the aerial
Unable to download, Check Equipment
The tape or disc is active. Stop the equipment and try again.
WARNING
All current tuning data will be erased
Auto setup will be erased all present tuning data (p. 23).
FAQs
TV unit goes into
"Standby mode"
The sleep function is activated.
The TV unit enters "Standby mode" about 30 min. after broadcasting ends.
The remote control
does not work
Are the batteries installed correctly? (p. 6)
Has the TV unit been switched On?
OtherSD
Key not available
You cannot select the same input source between Main and
Sub screen when you are viewing in multi window. (p. 13)
On screen messages (SD Card)
On screen messages Actions / Meanings
Cautions when handling SD Card :
Do not remove the card while the unit is accessing data ("blue" LED
On) (this can damage card or unit).
Do not touch the pins on the back of the card.
Do not subject the card to a high pressure or impact.
Insert the card in the correct direction (otherwise, card may be
damaged).
Electrical interference, static electricity, or erroneous operation may
damage the data or card.
Back up the recorded data at regular intervals in case of deteriorated
or damaged data or erratic operation of the unit. (Panasonic is not
liable for any deterioration or damage of recorded data.)
Blue LED
WARNING: As with an small object, SD
card can be swallowed by young
children. Do not allow children to handle
SD card. Please remove SD card
immediately after use.
Is SD Card in?
SD Card is locked
Please unlock to operate
This le is locked
Please unlock to operate
This type of format is not
supported
This type of card is not
supported
Broken le
Cannot display image
Memory full
Not enough memory
Cannot read le
Unrecordable source
SD recording is stopped
Error
Check card
Card recording in progress
Please stop recording to operate
Insert a SD card.
Unlock the SD card.
Unlock the le in the card.
The unit does not support the format.
(For the applicable formats and data, see p. 38.)
A card not supported by the unit has been inserted.
(For the supported cards, see p. 38.)
The le is broken.
The card memory is full.
The card does not have enough memory to operate.
The le is not readable.
That channel cannot be recorded. (Recording is automatically
stopped.)
Re-insert the card. If the error persists, format
the card. (p. 29)
That operation is not available during recording.
To continue the operation, stop recording.
(
For example, changing channels while recording
)
Delete le?
Displayed when you press Red colour button to delete a
MPEG4 le. Press OK button to con rm deleting.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TH42PV600EY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TH42PV600EY in the language / languages: English as an attachment in your email.

The manual is 13,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info