602432
23
Zoom out
Zoom in
Previous page
1/24
Next page
FAQs, etc.
44
45
FAQs
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care Centre
for assistance. For details (p. 48)
White spots or shadow
images (noise)
Check the position, direction, and
connection of the aerial.
Neither image nor
sound is produced
Is the unit in "AV mode"?
Is the mains lead plugged into the socket outlet?
Is the TV unit turned On?
Check Picture menu (p. 20) and volume.
Check all required SCART cables and
connections are rmly in place.
Auto aspect
Auto aspect is designed to provide you
with the best aspect ratio to use to ll your
screen. For user control please see p. 42.
S-Video / black and
white picture
Using TV/AV button please con rm your selection is
S-Video I.e. AV2/S-Video or AV3/S-Video (p. 17).
On Screen messages - I.e. AV1/EC1
You can simply clear these by pressing .
Press again to redisplay.
Direct TV record / Q-Link functions
not recording
Please con rm SCART cable and connection. Also please
set "AV2/AV3 out" in the Setup menu (p. 22).
Problem Actions
Chaotic image, noisy
Set "P-NR" in the Picture menu (to remove noise). (p. 21)
Check nearby electrical products
(car, motorcycle, uorescent lamp).
No image can be
displayed
Is "Colour" or "Contrast" in the Picture menu set to the
minimum? (p. 21)
Blurry or distorted image
(no sound or low volume)
Reset channels. (p. 28 and p. 30)
Frequently Asked Questions
No programmes shown on TV Guide
DVB TV Guide
:Landscape
Wed 12/05/04 10:46
Wed 12th
Time: 19:30 20:00
Prog. type
Category
All Services
20:30 21:00 21:30
All Types
Category
All Services
Check the DVB transmitter.
Adjust the direction of the aerial to another transmitter installed nearby.
Check the analogue broadcast.
If the image quality is poor, check the aerial and consult your nearest dealer.
Problem Actions
logo appears at the
four corners of the screen
Screen
Contrast is reduced
Permanently lit spots on
screen
Due to production process involved in this technology
this may result in some pixels which are permanently lit
or unlit. This is not a malfunction.
Screen HDMISound DVB
No sound is produced
Is "Sound Mute" active? (p. 7)
Is the volume set to the minimum?
Sound is unusual
Set the sound setting of the connected equipment to
"2ch L.PCM".
Check the "HDMI1 input" setting in the Sound menu.
(p. 21)
If digital sound connection has a problem, select
analogue sound connection. (p. 21)
Sound level is low
or sound is distorted
Sound signal reception may be deteriorated.
Set "NICAM" (p. 20) in the Sound menu to "Off".
(Analogue only)
TV unit goes into
"Standby mode"
The sleep function is activated.
The TV unit enters "Standby mode" about 30 min.
after broadcasting ends.
The remote control
does not work
Are the batteries installed correctly? (p. 6)
Has the TV unit been switched On?
Pictures from external
equipment are unusual
when the equipment is
connected via HDMI
Is the HDMI cable connected properly? (p. 40)
Turn Off the TV unit and equipment, then turn them On
again.
Check an input signal from the equipment. (p. 43)
Use an equipment compliant with EIA/CEA-861/861B.
Interference or
frozen / disappearing
image in DVB
Check "Signal Condition". (p. 28)
If "Signal Quality" or "Signal Strength" are displayed in
red, check aerial.
If problem persists, consult your local Panasonic dealer.
Use the remote control to turn Off the TV unit, then turn
it On again.
Due to the digital reception technologies involved, quality of the DTV signals may be relatively low in
some cases, despite good reception of analogue programmes.
Other
The function to prevent after-image (p. 5) is activated.
(Not a faulty symptom)
The screen saver is activated when the following
conditions without any user operation for a few minutes:
no signal in DVB or AV mode
selected locked channel
Contrast is lowered when the following conditions
without any user operation for a few minutes:
selected radio channel
displayed menu (except Tuning menu, Owner ID and
Shipping condition)
selected invalid or bad signal channel
"Control with HDMI"
function does not work
Switch the TV unit on again with the equipment on.
Set "Control with HDMI" to "Off", then set to "On"
again. (p. 38)
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TH37PX45B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TH37PX45B in the language / languages: English as an attachment in your email.

The manual is 17,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info