618894
4
Zoom out
Zoom in
Previous page
1/8
Next page
4
Setup (continued)
The wireless sound system can be used as a stand-alone audio amplifier when an
external device (e.g. MP3 player) is connected to its MUSIC PORT. To conveniently hold
the external device, you can attach the included pocket-type or stand-type cradle.
Unplug the AC cord and disconnect the external device before attaching
the cradle.
1 Hang the cradle on the back of the wireless sound system.
Ensure the antenna mast is raised.
2 Secure the cradle with the screw.
Wireless setup diagram for pairing with the SH-FX60
wireless system
Your wireless sound system can be used in tandem with the SH-FX60 wireless system.
To avoid possible interference, refer also to page 2 “Avoiding interference”.
[Note[
Your wireless sound system can also be used in tandem with the SC-HT640W home
theater system. For pairing, you can follow the same procedure as shown below for the
SH-FX60 wireless system.
Attaching the external digital audio player cradle
(included)
1
2
Stand-type cradle attachment
1
2
Pocket-type cradle attachment
SB-FX80 wireless
sound system (included)
SH-FX60 wireless
system (not included)
e.g.
Preparation
The following steps are to be performed after setting up the SH-FX60 wireless system. For proper setup, refer to its operating instructions.
Do not remove the SH-FX60T transceiver card from the home theater unit.
Store your SH-FX80T transceiver card in a cool dry place for later use.
To cancel pairing, or to use the SB-FX80 wireless
sound system without the SH-FX60 wireless system
1 Turn off your home theater unit.
2
Swap the SH-FX60T transceiver card with the SH-FX80T transceiver card.
3 Turn on your home theater unit.
4 Follow steps 2 through 6
(
above).
Pairing is canceled when the lighting ring lights up. The SB-FX80 wireless sound
system can now be used without the SH-FX60 wireless system.
Pairing your SB-FX80 wireless sound system with the SH-FX60 wireless system (not included)
1
Unplug the SH-FX60 wireless system from the AC outlet.
2
Move the SB-FX80 wireless sound system next to your home
theater unit.
After pairing is completed, you can move the SB-FX80 wireless sound system to
the desired location.
3
Select “MAIN SET” on the SB-FX80 wireless sound system (
page 3).
Ensure the SB-FX80 wireless sound system is plugged into the AC outlet.
4
Reduce the volume on your home theater unit.
5
[For[HT[models] (e.g. SC-HT740)
Press and hold [SURROUND MUSIC] on your home theater unit
until “P” lights in the display.
Ensure the “REAR MUSIC P.” source is not selected.
[For[RT[models] (e.g. SC-RT50)
1 Press [AUX] on your remote control to select “AUX”.
2 Press and hold [] (Stop) on your home theater unit.
Do not release the button.
3 Wait at least 5 seconds, and then press [MUTING] on your
remote control.
“P” lights in the display.
4 Release [] (Stop).
6
While “P” is displayed
Using a pointed object, press [I/D SET] on the back of
the SB-FX80
wireless sound system.
During pairing, the lighting ring will temporarily light up for a short period of time.
7
Plug the SH-FX60 wireless system back into the AC outlet.
After the SH-FX60 wireless system and SB-FX80 wireless sound system lighting
rings both light up, pairing is completed.
When paired, the SB-FX80 wireless sound system is linked to your home theater
system only when the SH-FX60 wireless system is also linked.
8
Start play on your home theater unit.
AC IN
~
Hi
SOUND
Lo
I/D SET
I/D SET
SOUND
Lo Hi
Back of the SB-FX80 wireless sound system
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SHFX80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SHFX80 in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info