50
RQT5975
References
Displays
BLANK DISC An MD with no recording on it is inserted.
CAN’T COMBINE System limitations prevent combining some tracks.
CAN’T DIVIDE System limitations prevent dividing some tracks.
CAN’T EDIT
You cannot edit titles during program, random, or repeat play. Cancel the modes to continue.
DISC ERROR There is a problem with the disc and you need to replace it.
DISC FULL There is no space on the disc. Erase some tracks or record with another disc.
DISC PROTECTED
Close the write protect hole to enable recording and editing (a page 11).
TAPE PROTECTED
Close the write protect hole to enable recording (a page 21).
EJECT ERROR
LOAD ERROR
A problem occurred while loading or ejecting the disc. After this is displayed the unit automatically switches
off. Remove the MD and start again.
EMERGENCY STOP A problem occurred during recording. Eject the MD, reinsert it and start recording from the beginning again.
ERROR Incorrect operation was performed. Read the instructions and try again.
F –
H –
There may be a problem with the circuitry. Turn the unit on again.
If this does not fix the problem, consult your dealer.
GROUP DATA FULL There is no space in UTOC and editing is not possible. To proceed, erase or shorten titles, or release a group.
MD F – Turn the unit off then on again and reinsert the MD. Consult a dealer if the display appears again.
MD NO DISC
CD NO DISC
A disc hasn’t been inserted.
NO REMAIN
You cannot record an entire CD if there is not enough space on the MD. Erase some tracks or record with
another disc.
NO TAPE A cassette hasn’t been inserted.
REMAINING/SHORT
You have started AUTO REC on a CD to an MD but there is not enough space for all the tracks.
PlaybackDISC This is a playback only disc. You cannot record on it or edit it.
SCMS CAN’T COPY
¡ You cannot record from video CDs or CD-ROM.
¡ You are trying to record digitally from a CD-R or CD-RW that is protected by SCMS (a page 11). Press
[EDIT MODE] to select “ANALOG-REC”.
TITLE OVER The title has 101 or more characters. The extra characters are erased if you press [ENTER].
TITLE FULL You have entered the maximum number of letters for the track title.
TRACK NUMBER/NOT EQUAL You cannot use title station to copy titles if the second MD has a different number of tracks.
TOC Reading The unit is reading information on the disc. The unit cannot be operated while this is displayed.
UTOC FULL This display appears for one of the following reasons.
¡ The section reserved for text information is full; erase unneeded titles to make room.
¡ The maximum number of tracks (254) has been reached; erase unneeded tracks.
¡ You tried to edit groups when there was not enough space in UTOC; erase or shorten titles, or release a
group.
TRACK PROTECTED The track was write-protected on another unit. Check whether you want to erase or edit the track before
proceeding.
Before requesting service, make the below checks. If you can’t fix the system as described below, or if something not listed here occurs, refer to the
enclosed directory to locate an Authorized Service Center convenient to you or contact your dealer.
Reference pages are shown as black circled numbers t.
The unit may become warm during operation, but this is normal.
Note
Common Problems
No sound.
Humming heard during play. An AC mains lead or fluorescent light is near the cables. Keep other appliances and leads away from this
unit’s cables.
If possible in your area, turn the AC mains lead’s plug or connector over to reverse the lead’s polarity.
Sounds unfixed, reversed or
come from one speaker only.
Check the speaker connections. t
Troubleshooting guide
Turn the volume up.
The speaker cords may be shorted. Turn the unit off, check and correct the connections and turn the unit on.
t
