371075
35
Zoom out
Zoom in
Previous page
1/36
Next page
35
RQT6387
Reference
Some distortion is normal during SEARCH.
The screen may be disrupted briefly when you turn on and off the AUDIO ONLY feature. @
Ensure that the television is connected properly. :
Make sure the television is on.
Ensure the television’s video input setting (e.g., VIDEO 1) is correct.
Go to the Video menu in the SETUP screen, and change “TV Aspect” to suit your television. You
may also need to change the screen mode on the television itself. ;
Ensure that the unit is connected directly to the television, and is not connected through a video
cassette recorder.
Check the settings in the GUI screen’s video menu. E
The location and orientation of the antenna are incorrect. If you are using an indoor antenna,
change to an outdoor antenna. P
The television antenna wire is too close to the unit. Separate the antenna wire of the television
from the unit.
Picture
Picture distorted.
No picture.
The picture shown on the
television is not normal.
(The sides of the picture are cut
off or black bands appear at the
top and bottom of the screen.)
Picture quality is poor.
The picture on the television
disappears or stripes appear on
the screen.
Adjust the position of the FM or AM antenna. :
Use an outdoor antenna. P
Turn the television off or separate it from the unit.
Separate the antenna from other cables and cords.
Change the frequency step. Press [TUNER/BAND] to select “AM”, then press and hold [SELECT] for
10 seconds to change the step to suit your area.
Listening to the radio
Noise is heard.
The stereo indicator flickers or
doesnt light.
Sound is distorted.
A beat sound is heard.
A low hum is heard during AM
broadcasts.
The correct AM frequency can't be
tuned in.
Maintenance
The surface of the cabinet is polished.
Use the included cloth to clean it.
Never use alcohol, paint thinner or benzine to clean this unit.
Unit displays
Press [DISPLAY] to turn the display on.
You inserted a disc the unit cannot play; insert one it can. 5
You haven’t inserted a disc; insert one.
You haven’t inserted the disc correctly; insert it correctly. =
Check and correct the speaker cord connections.
If this does not fix the problem, there is a power supply problem. Consult the dealer.
The disc is dirty. Wipe it with a soft cloth. 5
Incorrect operation performed. Read the instructions and try again.
Trouble is likely to have occurred. The number following “H” depends on the status of the unit.
Reset procedure:
Press [Í] to switch the unit to the standby mode and then back to ON. Alternatively, press [Í] to
switch the unit to the standby mode, disconnect the AC mains lead, and then reconnect it.
If the service numbers fail to clear, note the service number and contact a qualified service person.
No on-screen display.
GUI screens not displayed or only
partially displayed on the
television.
The discs menu is displayed in a
different language.
Go to Display in the SETUP menus, and select “On” for “On-Screen Messages”. L
Press [3, 4] while the rightmost icon is highlighted to move them down. C
Go to Disc in the SETUP menus, and select the preferred language for “Menus”. L
Television displays
This unit's display is off.
NO PLAY
NO DISC
F61
DVD U11
ERROR
DVD H
∑∑∑∑
∑∑∑∑
∑∑
∑∑ stands for a number.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic sc dt 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic sc dt 100 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic sc dt 100

Panasonic sc dt 100 User Manual - Dutch - 36 pages

Panasonic sc dt 100 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info