608316

Panasonic SBWA800 Manual

4
Zoom out
Zoom in
Previous page
1/32
Next page
RQT7808
4
ENGLISH
ESPAÑOL
Placement
Set the unit up on an even surface away from direct sunlight, high
temperatures, high humidity, and excessive vibration. These conditions
can damage the cabinet and other components, thereby shortening the
unit’s service life.
Voltage
Do not use high voltage power sources. This can overload the unit
and cause a fire.
Do not use a DC power source. Check the source carefully when
setting the unit up on a ship or other place where DC is used.
AC mains lead protection
Ensure the AC mains lead is connected correctly and not damaged.
Poor connection and lead damage can cause fire or electric shock. Do not
pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC mains
lead can cause electric shock.
Do not handle the plug with wet hands. This can cause electric shock.
Foreign matter
Do not let metal objects fall inside the unit. This can cause electric
shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock or
malfunction. If this occurs, immediately disconnect the unit from the power
supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain flammable
gases which can ignite if sprayed into the unit.
Service
Do not attempt to repair this unit by yourself. If sound is interrupted,
indicators fail to light, smoke appears, or any other problem that is not
covered in these operating instructions occurs, disconnect the AC mains
lead and contact your dealer or an authorized service center. Electric shock
or damage to the unit can occur if the unit is repaired, disassembled or
reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from the power source
if it is not to be used for a long time.
The socket outlet shall be installed near the equipment and easily
accessible or the mains plug or an appliance coupler shall remain readily
operable.
Precauciones de seguridad
Ubicación
Coloque la unidad en una superficie plana lejos de la luz directa del
sol, temperatura y humedad altas, y vibración excesiva. Estas condiciones
pueden dañar el gabinete y otros componentes, y por lo tanto acortar la
vida útil de la unidad.
Voltaje
No use fuentes de alimentación de alto voltaje. Esto puede sobrecargar
la unidad y causar un incendio.
No use una fuente de alimentación de CC. Verifique cuidadosamente
la fuente cuando coloque la unidad en una embarcación u otro lugar donde
CC sea usada.
Protección del cable de alimentación de CA
Asegúrese que el cable de alimentación de CA esté conectado
correctamente y no dañado. Una mala conexión y daño en el cable pueden
causar un incendio o un choque eléctrico. No jale, doble el cable ni coloque
objetos pesados sobre él.
Coja el enchufe firmemente cuando desenchufe el cable. El jalar el
cable de alimentación de CA puede causar choque eléctrico.
No maneje el enchufe con manos mojadas. Esto puede causar choque
eléctrico.
Objetos extraños
No permita que objetos de metal caigan dentro de la unidad. Esto
puede causar choque eléctrico o fallas.
No permita que líquidos penetren en el aparato. Esto puede causar
choque eléctrico o fallas. Si esto ocurre, desconecte inmediatamente la
unidad de su alimentación y póngase en contacto con su distribuidor.
No rocíe insecticidas sobre o dentro de la unidad. Contienen gases
inflamables que pueden encenderse si son rociados dentro de la unidad.
Servicio
No intente reparar esta unidad por sí mismo. Si el sonido se interrumpe,
los indicadores no se iluminan, sale humo o sucede cualquier problema
que no está tratado en estas instrucciones, desconecte el cable de
alimentación de CA y póngase en contacto con su distribuidor o con un
centro de servicio autorizado. Puede ocurrir un choque eléctrico o daño a
la unidad si esta unidad es reparada, desarmada o reconstruida por
personas no calificadas.
Extienda la vida útil de la unidad desconectándola de la fuente de
alimentación si no va a ser usada por largo tiempo.
El equipo deberá colocarse cerca de la toma de CA, y a la clavija del
cable de alimentación deberá poder accederse fácilmente en el caso
de que se produzca un problema.
La unidad no quedará completamente desconectada de la red eléctrica
aunque el interruptor de la alimentación de CA se ponga en “OFF”
(desconectado). Desenchufe la clavija de alimentación de la toma de
corriente si no va a utilizar la unidad durante mucho tiempo. Coloque la
unidad en lugar donde la clavija de alimentación pueda desenchufarse
fácilmente.
Safety precautions
Although the AC power switch is in the “OFF” position, the unit is not
completely disconnected from the mains. Remove the plug from the
main electrical outlet if you will not be using the unit for an extended
period of time. Place the unit so the plug can be easily removed.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SBWA800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SBWA800 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info