492359
55
Zoom out
Zoom in
Previous page
1/56
Next page
55
RQT9224
Pages
When using an HDMI
connection, the rst few
seconds of sound is cut off.
• Should you be playing a chapter on a DVD etc.:
Change the audio output setting on the Blu-ray Disc/DVD player or DVD
recorder from “Bitstream” to “PCM”. (6.1-channel sources will however
be played as 5.1-channel
.)
Select “PCM ” as instructed in “Setting input signals” when you play
2-channel stereo sources.
39
The unit does not work properly.
The unit does not work properly when wrong cords are in HDMI input and output
terminals. Turn the unit off, unplug the AC mains lead, and make connections again.
13, 17
VIERA Link does not function
properly.
• Con rm “Setting VIERA Link to “OFF ”” is set to ON ”. When it is “OFF ”,
change to ON ”.
• VIERA Link does not function in power saving standby mode when this
unit is turned off. See “Reducing standby power consumption (power save
mode)” and set to “ON ” (normal power consumption).
• Check VIERA Link settings of the connected equipment.
• VIERA Link may not function when you change the connections for HDMI
equipment, insert and remove the outlet, or during blackout. Do the
following operations in this case.
Turn the TV (VIERA) on again while all the equipment connected with HDMI cables are on.
Set “VIERA Link (HDMI equipment control)” of TV (VIERA) to “OFF” and then set to “ON”
again. (For details, refer to the operating instructions for TV (VIERA).)
Connect this unit to TV (VIERA) using the HDMI cable, switch the
TV (VIERA) on, unplug this unit’s AC mains lead, and insert it into a
household mains socket again.
40
40
When more than one piece of
equipment are connected to HDMI
input terminal, some of them turn
on and off automatically.
• Some of the linked operations apply to the connected equipment that is
VIERA Link compatible. To prevent this, set the connected equipment (DVD
recorder (DIGA) and others) against VIERA Link.
The remote control doesn’t work.
• Replace the batteries if they are worn. 7
Other products respond to the remote control.
• Change this unit’s remote control mode to “REMOTE 2 ”. 42
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used
electrical and electronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable
collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential
negative effects on human health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your
local municipality, your waste disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for
further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please
contact your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical involved.
Troubleshooting guide/Maintenance
Maintenance
Unplug the AC mains lead from the household mains socket and wipe the unit using a soft and dry cloth.
When the unit is very dirty, wring the cloth soaked in water thoroughly, wipe the dirt and wipe moisture off with a dry cloth.
Do not use solvents such as benzine, thinner, alcohol, etc. because they may cause casing to deform and coating to go off.
Before using chemically treated cloth, read the instructions that come with the cloth carefully.
Reference
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SA-BX500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SA-BX500 in the language / languages: English as an attachment in your email.

The manual is 9,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SA-BX500

Panasonic SA-BX500 User Manual - German - 56 pages

Panasonic SA-BX500 User Manual - Dutch - 56 pages

Panasonic SA-BX500 User Manual - Danish - 56 pages

Panasonic SA-BX500 User Manual - French - 56 pages

Panasonic SA-BX500 User Manual - Italian - 56 pages

Panasonic SA-BX500 User Manual - Polish - 56 pages

Panasonic SA-BX500 User Manual - Swedish - 56 pages

Panasonic SA-BX500 User Manual - Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info