110429
4
Zoom out
Zoom in
Previous page
1/80
Next page
RQT8946
4
4
Listening to the radio
Turn on the unit’s
power.
1
Press .
To turn the power off, press
the button again.
Adjust the volume.
3
Turn to adjust the
volume. (0 to 50)
Standby/on switch ( )
Press to switch the unit from on to
standby mode or vice versa.
In standby mode, the unit is still
consuming a small amount of power.
To improve reception
Adjust the length and angle of the rod
antenna to obtain the best reception.
If you take hold of the unit’s rod antenna
and move it from one place to another,
you may damage the unit.
To move the unit, make sure you pick it
up by the handle on the rear panel, and
then move it.
Note
Handle
When the power is turned on
again, the broadcast station that
was last tuned in when the power
was turned off, will be tuned in.
Note
Automatic tuning
When is pressed, automatic tuning starts, and it
stops at the station which is tuned in first. Repeat this
until the station you want to listen to is tuned in.
Depending on the quality of the reception, automatic tuning may not be
possible.
During tuning press to stop.
Note
Select the broadcast station.
2
Turn to select the desired station.
Making it easier to understand
what’s being said (RF-U350 only)
You can adjust the speed of what’s being said to
understand newscasts, the dialogue of characters in
dramas, etc. better.
Press .
• The indicator around
now lights.
To close the slow speech function, press the button
again. (The indicator around now goes off.)
When the slow speech function is activated, the sound
quality will automatically be switched to NORMAL and
cannot be changed.
The slow speech function effects may not be obtained with
some music programs and other broadcast content.
The slow speech function is released in the following cases:
(1) When the power is turned off
(2) When you have changed the station you are now
listening to
When the slow speech function is set to ON, the tone quality
will change, and there will be a delay in the sound heard.
The speed of the slow speech function cannot be changed.
When the slow speech function is set to ON while the
reception is poor and accompanied by a lot of noise,
the noise will be amplified, making the sound hard to
listen to. At a time like this, set the function to OFF.
Note
RDS broadcasting
This unit can display the text data transmitted by the radio
data system (RDS) available in some areas.
The panel display is automatically switched when a
Program Service name (PS) or Radio Text message
(RT) is received.
When a Program Service name
(PS) is received
When a Radio Text message
(RT) is received
RDS displays may not be available if reception is
poor.
During timer operations the unit will not automatically
switch over to the RDS displays. To indicate the RDS
displays, press .
Note
The illustrations
show
RF-U350.
TUNED” appears for
about 1 second when a
station is tuned in.
RF_U350_8946_E.indb 4 2007/02/02 13:04:10
4


Need help? Post your question in this forum.

Forumrules
1

Forum

panasonic-rf-u300

Reset search

  • Hello,

    I have a problem. When you use the mains as power supply and you unplug the radio, the presets are lost. How to avoid this?

    Thanks advance

    Walter Submitted on 15-10-2023 at 15:30

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic RF-U300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic RF-U300 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 22,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info