598890
127
Zoom out
Zoom in
Previous page
1/129
Next page
Ceiling mount bracket safeguards
ENGLISH -
127
Appendix
Ceiling mount bracket safeguards
When installing the ceiling mount bracket to the projector, install the accessory Drop-prevention bracket (Safety
cables) to the projector.
(The projector will still be safe if they are not used, however they will help prevent the possibility of accidents
caused by the projector falling down if the screws happen to become loose.)
Ceiling bracket : For high ceiling : ET-PKD310H, For low ceiling : ET-PKD310S,
Ceiling Mount Attachment : ET-PAD310
Installation work of the ceiling mount bracket should only be carried by a
qualied technician according to the following procedure.
Panasonic takes no responsibility for any losses or damage occurring as a result of using a ceiling mount
z
bracket not manufactured by Panasonic, or if damage to the projector occurs as a result of an inappropriate
location used for installing the ceiling mount bracket, even if the projector’s warranty period has not yet expired.
Use a torque screwdriver or similar tool to tighten the screws. Do not use tools such as electric screwdrivers or
z
impact screwdrivers.
An unused ceiling mount bracket should be removed promptly by qualied technician.
z
Do not use the screw holes of the front leg adjusters for the projector installation.
z
Do not attach the safety cable to the burglar hook port and suspend the projector on it.
z
For how to install wire ropes to the ceiling, see the installation manual for the ceiling mount bracket.
z
For details, see the installation manual for the ceiling mount bracket.
z
The part numbers of accessories and separately sold components are subject to change without notice.
z
Attachment procedure
Turn the projector upside down and 1 )
place it gently on a soft cloth.
Put the plain washer on the wire rope 2 )
xing screw.
Put the wire rope through the wire rope 3 )
xing screw.
Install the wire rope xing screws to the 4 )
projector and tighten them.
Install the wire ropes to the 2 places in a similar
z
manner.
Wire rope xing screw: M6 x L20.
Tightening torque of xing screw: 4 ± 0.5 Nm
Attention
Do not use other than the provided Wire rope xing screw (x2), washers (x4) and Safety cables (x2).
z
Install the wire ropes so that they do not sag between the installation portions on the body and those on the ceiling.
z
Ceiling bracket
(Metal tting attached to the ceiling mount bracket or projector
metal tting for the ceiling mount bracket)
Wire rope
Positions to install
wire ropes to body
Plain washer
Wire rope xing screw
Washer
Please also attach the washer
which is additional accessory to
the ceiling mount.
Ceiling mount
127


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DS8500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DS8500 in the language / languages: English as an attachment in your email.

The manual is 12,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info