627478
23
Zoom out
Zoom in
Previous page
1/27
Next page
Others
-51-
automatically to protect the tape or a Card and to save the
Battery power. (
-15-, -31-)
3: The Movie Camera power does not stay on long
enough.
Is the Battery low? Charge the Battery or attach a fully
charged Battery. (
-8-)
Has condensation occurred? Wait until the Condensation
Indication disappears. (
-49-)
Battery
1: Battery runs down quickly.
Is the Battery fully charged? Charge it with the AC
Adaptor. (
-8-)
Are you using the Battery in an extremely cold place? In
cold places, the operating time of the Battery becomes
shorter. (
-49-)
Has the Battery worn out? If the operating time is still too
short even after the Battery is fully charged, the Battery
has worn out.
2: The Battery cannot be charged.
If the DC Input Lead is connected to the AC Adaptor,
charging cannot be performed. Disconnect the DC Input
Lead.
Normal Recording
1: Recording does not start although power is supplied
to the Movie Camera and the Cassette is correctly
inserted.
Is the accidental erasure prevention slider on the Cassette
open? If it is open (set to [SAVE]), recording cannot be
performed. (
-9-)
Is the tape wound to the end? Insert a new Cassette. (
-9-)
Is the Movie Camera power turned on? (
-15-)
Is the [CAMERA] Lamp on? If the [CAMERA] Lamp is not
on, no recording function can be operated. (
-15-)
Has condensation occurred? Wait until the Condensation
Indication disappears. (
-49-)
Other Recording
1: Auto Focus Function does not work.
Is Manual Focus Mode selected? If Auto Focus Mode is
selected, focus is automatically adjusted. (
-21-)
There are some recording subjects and recording
surroundings for which the Auto Focus Function does not
operate correctly. In this case, use the Manual Focus
Mode to adjust the focus. (
-52-)
Editing
1: Audio dubbing cannot be performed.
Is the accidental erasure prevention slider on the Cassette
open? If it is open (set to [SAVE]), recording cannot be
performed. (
-9-)
Are you attempting to edit a tape portion that was recorded
in LP Mode? LP Mode does not allow audio dubbing to
operate. (
-14-)
Indications
1: The Time Code becomes inaccurate.
0 The Time Code Indication counter may not be constant in
the reverse direction in Slow Motion Playback Mode, but
this is not a malfunction.
2: The Remaining Tape Time Indication disappears.
When you record still pictures in Photoshot Mode, the
Remaining Tape Time Indication may disappear
temporarily. However, it reappears when recording
normally.
3: The Remaining Tape Time Indication does not match
the actual remaining tape time.
If scenes of less than 15 seconds are continuously
recorded, the remaining tape time cannot be displayed
correctly.
In some cases, the Remaining Tape Time Indication may
show remaining tape time that is 2 to 3 minutes shorter
than the actual remaining tape time.
Playback (Pictures)
1: Pictures cannot be played back even when the [1]
Button is pressed.
0 Is the [VCR] Lamp on? If the [VCR] Lamp is not on, the
playback function cannot be used. (
-25-)
2: Mosaic-pattern noise appears on images during Cue,
Review or Slow Motion Playback.
This phenomenon is characteristic of digital video
systems. It is not a malfunction.
3: Although the Movie Camera is correctly connected to
a TV, playback images cannot be seen.
Have you selected “Video Input” on the TV? Please read
the operating instructions of your TV and select the
channel that matches the input sockets used for the
connection.
4: Playback picture is not clear.
Are the heads of the Movie Camera dirty? If the heads are
dirty, playback image cannot be clear. (
-49-)
Playback (Sound)
1: Sound is not played back from the built-in speaker of
the Movie Camera or the headphones.
0 Is the volume too low? During playback, keep pressing the
[PUSH] Dial until the [VOLUME] Indication appears. Then,
turn the [PUSH] Dial to adjust the volume. (
-25-)
2: Different sounds are reproduced at the same time.
[12bit AUDIO] on the [PLAYBACK FUNCTIONS]
Sub-Menu of the [VCR FUNCTIONS] Main-Menu has
been set to [MIX]. As a result, the original sound and
sound that was recorded by audio dubbing are played
back together. It is possible to reproduce the sounds
separately. (
-29-)
3: The original sound was erased when audio dubbing
was performed.
If you perform audio dubbing on a recording done in [16bit]
Mode, the original sound will be erased. If you wish to
preserve the original sound, be sure to select [12bit] Mode
at the time of recording.
4: Sounds cannot be played back.
Although a Cassette with no audio dubbing is being
played, is [12bit AUDIO] on the
[PLAYBACK FUNCTIONS] Sub-Menu of the
[VCR FUNCTIONS] Main-Menu set to [ST2]? To play back
a Cassette with no audio dubbing, [12bit AUDIO] must be
set to [ST1]. (
-29-)
Is the Variable Speed Search Function working? Press the
[1] Button to cancel the Variable Speed Search Function.
(
-25-)
Card
1: Recorded pictures are not clear.
0 Is [PICTURE QUALITY] on the [CARD SETUP] Sub-Menu
set to [NORMAL] or [ECONOMY]? If recording is done
with it set to [NORMAL] or [ECONOMY], images with fine
details may include a mosaic-like pattern. Set
[PICTURE QUALITY] to [FINE]. (
-32-)
2: Card Photoshot Playback images do not look normal.
The picture may be damaged. In order to prevent the loss
of image data, backing up on a Cassette or a personal
computer is recommended. (
-34-, -39-)
3: During Playback the [k] Indication is displayed.
The image was either recorded in a different format, or
data is damaged.
4: Even if a Card is formatted, it cannot be used.
Either the Movie Camera or the Card may be damaged.
Please consult a dealer.
B5-B.book 51 ページ 2002年8月6日 火曜日 午前11時33分
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NVMX500EG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NVMX500EG in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic NVMX500EG

Panasonic NVMX500EG User Manual - English - 11 pages

Panasonic NVMX500EG User Manual - Dutch - 63 pages

Panasonic NVMX500EG User Manual - French - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info