627277
126
Zoom out
Zoom in
Previous page
1/132
Next page
126
ENGLISH
ENGLISH
DEUTSCH
Indications
P1: The Time Code becomes incorrect.
S1: In the Slow Motion Playback Mode in reverse direction,
the counter of the Time Code Indication may not be
stable, however, this is not a malfunction.
P2: The Remaining Tape Time Indication disappears.
S2: If you record a still picture in the Photoshot Mode, the
Remaining Tape Time Indication may disappear
temporarily. However, if you switch the Movie Camera
over to the Normal Recording Mode, it appears again.
P3: The Remaining Tape Time Indication does not
match the actual remaining tape time.
S3-1: If scenes of less than 15 seconds are recorded
successively, the remaining tape time is not indicated
correctly.
S3-2: The Remaining Tape Time Indication may show a
remaining tape time that is 23 minutes shorter than
the actual remaining tape time.
Playback (Picture)
P1: No playback picture is reproduced when pressing
the Play Button [1].
S1: Is the [VCR] Lamp lit? When the [VCR] Lamp is not lit,
no playback functions can be operated. (l 27)
P2: Mosaic-like patterns appear in the picture during
Cue, Review or Slow Motion Playback.
S2: This phenomenon is a characteristic of the digital video
system. This is not a malfunction. (l 28, 29)
P3: I want to play back the picture on a TV.
S3: Attach the Output Terminal Box [AV ONE TOUCH
STATION] to the Movie Camera and use the AV Cable
(PHONO-PHONO) to connect it to the TV. Or use the
AV Cable (PHONO-M3) to connect the Movie Camera
directly to the TV. (l 31)
P4: The Movie Camera is correctly connected to a TV,
but no playback picture is reproduced.
S4: Did you select Video Input on the TV? Carefully read
the operating instructions for your TV and select the
channel that matches the input sockets used for
connection.
P5: The playback picture is not reproduced clearly.
S5: Are the video heads on the Movie Camera dirty? If the
video heads are dirty, the picture cannot be played
back clearly.
Anzeigen
P1: Der angezeigte Timecode ist nicht korrekt.
A1: Bei der Zeitlupen-Wiedergabe rückwärts ist das
hlwerk der Timecode-Anzeige nicht stabil. Dies ist
jedoch keine Funktionsstörung.
P2: Die Bandrestzeit-Anzeige verschwindet.
A2: Wenn Sie ein Standbild im Photoshot-Modus
aufzeichnen, kann die Bandrestzeit-Anzeige
u. U. vorübergehend verschwinden. Wenn Sie jedoch
erneut im normalen Aufnahmemodus aufzeichnen,
erscheint sie erneut.
P3: Die Bandrestzeit-Anzeige entspricht nicht der
effektiv auf dem Band verbleibenden Zeit.
A3-1: Wenn Sie wiederholt Szenen von weniger als
15 Sekunden aufzeichnen, wird die Bandrestzeit nicht
korrekt angezeigt.
A3-2: Die angezeigte Bandrestzeit kann u. U.
23 Minuten kürzer sein, als die effektiv auf dem Band
verbleibende Zeit.
Wiedergabe (Bild)
P1: Beim Drücken der Wiedergabe-Taste [1] wird kein
Bild wiedergegeben.
A1: Leuchtet die Lampe [VCR]? Wenn die Lampe [VCR]
nicht leuchtet, kann keine Wiedergabe-Funktion
ausgelöst werden. (l 27)
P2: Mosaikartige Muster erscheinen im Bild während
Bildsuchlauf vorwärts und rückwärts oder
Zeitlupen-Wiedergabe.
A2: Dabei handelt es sich um eine für das Digital-Video-
System typische Erscheinung. Dies ist keine
Funktionsstörung. (l 28, 29)
P3: Ich möchte das Bild auf dem Fernsehgerät
wiedergeben.
A3: Die Anschluß-Box [AV ONE TOUCH STATION] am
Camerarecorder anbringen und diese mit dem AV-
Kabel (Cinch - Cinch) an das Fernsehgerät
anschließen. Oder das AV-Kabel (Cinch - M3)
verwenden, um den Camerarecorder direkt an das
Fernsehgerät anschließen. (l 31)
P4: Der Camerarecorder ist korrekt an ein Fernsehgerät
angeschlossen, aber es erscheint kein
Wiedergabebild.
A4: Haben Sie am Fernsehgerät Video-Eingang gewählt.
Lesen Sie bitte die Bedienungsanleitung Ihres
Fernsehgerätes durch und wählen Sie das Programm,
das den für die Anschlußverbindung benutzten
Eingangsbuchsen entspricht.
P5: Das Wiedergabebild ist nicht klar und sauber.
A5: Sind die Videoköpfe des Camerarecorders
verschmutzt? Wenn die Köpfe verschmutzt sind, kann
das Bild nicht sauber wiedergegeben werden.
126


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NVDS55EG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NVDS55EG in the language / languages: English, German as an attachment in your email.

The manual is 5,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info