734754
33
Zoom out
Zoom in
Previous page
1/35
Next page
– 33 –
Self Diagnostics Failure Code Explanation
Installation Instructions for Stacking
This oven monitors its operation and displays a Failure Code in the Digital Display Window when a problem occurs.
CODE PROBLEM
rFL Splatter shield is removed. Place it back. The oven is inoperative without it.
U30 Memory cooking with double/triple quantity has exceeded the maximum cooking time.
Check and change the time. (See Step 3 “Note” on page 21.)
Press Stop/Reset Pad, and the code disappears.
U40 The temperature of electrical parts is too high. If the oven is operated without food, put the
food into the cavity and heat.
Press Stop/Reset Pad, and the code disappears.
F09 The oven is connected to 60 Hz. Connect to 50 Hz.
F code other
than F09
(F97, etc.)
If the “F” code does not disappear even after pressing Stop/Reset Pad, pull out the plug
and then plug it in again after 5 seconds. The oven is faulty if the “F” code still appears.
Unplug the oven or shut off the power at the circuit breaker, and contact the dealer or a
service agent. (See page 10, MAINTENANCE OF YOUR OVEN.)
Joint Plate
Joint
Plate
Projection
Projection
Fig. 1 Fig. 2
Important
1. Disconnect the power cord from the wall socket
before attempting installation.
2. For stacking installation, you must use the
Panasonic Joint Plate A1134-3E11 (Available
via service route).
3. Combination of the unit for stacking is limited
within only the same models.
4. Do not stack more than one oven above bottom
oven.
Preparation
Be sure the oven cavity is empty.
Installation
1. Stack the units and remove five screws a as
shown in Fig. 1.
2. Loosen the screw b.
3. The projection on the Joint Plate must face
away from the oven. Place the Joint Plate on
the screw b.
4. Attach and tighten five screws a and the screw
b. See Fig. 2.
5. Ensure the top oven is at a safe and workable
height.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NE-1878 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NE-1878 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info