619776
4
Zoom out
Zoom in
Previous page
1/80
Next page
The SIP-CS must only be installed and serviced by qualified service personnel. The SIP-CS should be
used as-is from the time of purchase; it should not be disassembled or modified. Disassembly or
modification can cause a fire, electric shock, or damage to the SIP-CS.
Make sure that the wall that the SIP-CS will be attached to is strong enough to support the SIP-CS (approx.
290 g). If not, it is necessary for the wall to be reinforced.
Only use the wall-mounting equipment (screws, washers) included with the SIP-CS.
When the SIP-CS is no longer in use, make sure to detach it from the wall.
Disconnect the SIP-CS from the AC outlet, disconnect the LAN cable, and contact the dealer if:
The AC adaptor cord or AC plug becomes damaged or frayed.
The SIP-CS is exposed to rain, water, or any other liquid.
The SIP-CS is dropped or damaged.
Internal components are exposed due to damage.
The SIP-CS does not operate properly.
Performance deteriorates.
Disconnect the SIP-CS from the AC outlet and disconnect the LAN cable if the SIP-CS emits smoke, an
abnormal smell, or makes unusual noise. These conditions can cause fire or electric shock. Confirm that
smoke has stopped and contact an authorised service centre.
Clean the AC plug periodically with a soft, dry cloth to remove dust and other debris.
If using an AC adaptor, use only the optional AC adaptor KX-A239CE (PQLV206CE), KX-A239UK
(PQLV206E), KX-A239BX (PQLV206CE), KX-A239EJ (PQLV206E), or KX-A239AL (PQLV206AL).
If damage to the SIP-CS exposes any internal parts, immediately disconnect the cable or cord. If the power
is supplied from the network to the SIP-CS (Power-over-Ethernet), disconnect the Ethernet cables.
Otherwise, disconnect the AC adaptor cord. Then return the SIP-CS to a service centre.
The SIP-CS should only be connected to a power supply of the type shown on the label on the SIP-CS.
Completely insert the AC adaptor/power plug into the AC outlet. Failure to do so may cause electric shock
and/or excessive heat resulting in a fire.
CAUTION
Do not stretch or bend the cables. Also, do not allow anything to rest on the cables.
Do not bundle cables that are connected to the SIP-CS with the AC power cords of machines located
nearby.
To prevent malfunction, deformity, overheating, rust, and discolouration, do not install or place equipment
in the following types of locations:
Locations where air ventilation is poor.
Locations that may be exposed to sulphurous gas, such as near hot springs.
Near devices that emit heat, such as heaters.
Near devices that emit electromagnetic noise, such as radios or televisions.
Near devices that emit high-frequency noise, such as sewing machines or welders.
The SIP-CS and the cables should never be placed near or over a radiator or other heat source.
The SIP-CS should not be placed outdoors (use indoors).
4 Installation Guide
1 For Your Safety
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-UDS124 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-UDS124 in the language / languages: English as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info