110177
5
Zoom out
Zoom in
Previous page
1/80
Next page
-
5
-
to the open position until it clicks.
Blade clamp sleeve
Open position Close position
Insert the saw blade into the blade clamp
until the saw blade snaps in place and
clamp sleeve rotates. When the blade
clamp sleeve rotates, the saw blade is
fixed. Make sure that the saw blade is
firmly fixed and locked. If the blade clamp
does not lock properly, have the tool
serviced by a qualified repair personnel.
Blade
WARNING:
If you do not insert the saw blade
deep enough, the saw blade may
be ejected unexpectedly during
operation. This can be extremely
dangerous.
To remove the saw blade, rotate the
blade clamp sleeve in the direction
of the arrow (clockwise from the front
view) fully. The saw blade is removed
and the blade clamp sleeve is fixed at
the open position. Be careful when han-
dling hot blades after use.
Blade clamp sleeve
NOTE
:
If you remove the saw blade without
rotating the blade clamp sleeve fully,
the sleeve may not be fixed. In this
case, rotate the blade clamp sleeve
fully, then make the sleeve fixed at
the open position.
Blade Clamp Maintenance
Always keep blade clamp sleeve clean
and dry after use.
Periodically lubricate blade clamp sleeve
with a dry lubricant. Using wet lubricant
may keep the dust and debris, and
causes malfunction of the blade clamp.
. OPERATION
Hold tool by the insulated grip-
ping surfaces when performing an
operation where the cutting tool
may contact hidden wiring.
Always wear safety goggles or
glasses with side shields.
Adjusting shoe
When the blade loses its cutting efficien-
cy in one place along its cutting edge,
reposition the shoe to utilize a sharp,
unused portion of its cutting edge. This
will help to lengthen the life of the blade.
To reposition the shoe, loosen the shoe
lock lever counter-clockwise and slide
the shoe forward or back to the desired
position. Then tighten the lever clock-
wise to firmly secure the shoe.
Shoe lock lever
Shoe
Switch action
CAUTION:
Before inserting the battery pack
into the tool, always check to see
that the trigger switch actuates
properly and returns to the OFF”
position when released.
Switch lock lever
Trigger switch
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic EY 3544 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic EY 3544 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info