608231
2
Zoom out
Zoom in
Previous page
1/2
Next page
Method of use
Insert the headshell into the end of the tone arm
and fasten the locking nut.
Adjust the stylus pressure.
The optimum stylus pressure for this stylus is 2 grams.
Set the horizontal balance of the tone arm to zero (0), then set
the stylus pressure to the correct value.
Sound is distorted or the stylus jumps if the recording level
on the record is high or if the player is used in a cold room.
Increase the stylus pressure if this occurs.
Increase the stylus pressure for scratch play if the stylus
jumps.
Overly increasing the stylus pressure can cause the cartridge
body to touch the record. Reduce stylus pressure if this
occurs.
Locking nut
Headshell
18
(0.71 in.)
23
(0.91 in.)
9.5
(0.37 in.)
18
(0.71 in.)
12.7
(0.5 in.)
M2.6
52 mm
(2.05 in.)
Overhang gauge
(Included with SL-1200 series
turntables)
Stylus tip
(Wire)
Red
Green
White
Blue
(
Terminal
)
R+(Red)
R(
Green
)
L+(
White
)
L(Blue)
Cartridge dimensions
(millimeters)
B
A
C
D
Headshell
weight
Stylus tip
Mounting screw
Headshell
(Included with SL-1200 series
turntables)
Wire
Cartridge
Terminal
Replacing the stylus
Replace the stylus with part no. EPS-1200CS when necessary.
Replace the stylus after about 500 hours of use.
Remove the stylus from the cartridge.
Insert the new stylus (with the stylus cover attached)
into the cartridge.
Ensure the stylus is firmly in place.
Attaching the cartridge
( e.g.,when using with SL-1200 series turntables )
Use the screws to attach the included headshell
weight and cartridge to your headshell.
Remove the stylus (with the stylus cover attached) from
the cartridge to protect the stylus tip.
Connect the headshell's wires to the cartridges termi-
nals, following the color or symbol coding.
Reinsert the stylus (with the stylus cover attached) after
attaching the cartridge.
Ensure the stylus is firmly in place.
Adjust the facing and overhang.
Change the facing of the cartridge so it is straight on the
headshell.
Adjust the overhang so the stylus tip is 52 mm from the
plug.
Use the overhang gauge included with SL-1200 series turn-
tables to adjust the correct 15-mm overhang for this series.
If the cartridge is fitted to a different kind of tone arm or
player, consult the appropriate manual for adjustment
instructions.
Tighten the screws firmly.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic EPCU1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic EPCU1200 in the language / languages: English as an attachment in your email.

The manual is 0,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic EPCU1200

Panasonic EPCU1200 User Manual - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info