164740
6
Zoom out
Zoom in
Previous page
1/33
Next page
4
T-Push Tm
T-Push Tm
T-Pu l l Ct
Disk Tray Open/Close Speed Adjustment
Open/Close speed of the tray can be changed.
When vibration occurs upon tray open/close and some unusual behavior happens, change the tray speed to stop
vibration.
Description of the terms displayed on FL
start T-On Time open
Tray open
T-OffTim
start T-On Time close
Tray close
T-OffTim
<Vibration on Disc Tray Open / Close>
Step 1. With pressing DISPLAY and QUICK REPLAY buttons, press POWER button.
Step 2. Press EASY JOG button.
“T-OnTime 015” (means Tray On Time 015ms default) is displayed.
Tu r n EASY JOG to change tray open/close speed from 000 to 255ms. Turn the number smaller to make the
open/close speed slower. Turn the number bigger to make the speed faster. Set bigger number to stop the tray
vibration. But the open/close speed becomes faster.
Press EASY JOG button again. The display changes as shown below so you can change other parameters
for the open/close speed.
Display
(Default Setting)
Description Bigger Number Smaller Number
T- OffTim 003
When open/close speed is too fast.
Note) 001, 002, 003 cannot be set.
open/close speed
becomes faster
open/close speed
becomes slower
T- PushTm 070
When vibration cannot be stopped
by adjusting T-OnTime.
open/close speed
becomes slower
open/close speed
becomes faster
T- PullCt 040 When disc clamp miss happens. Set smaller number to make it better.
Step 3. Press EASY JOG button to complete adjustment.
Step 4. Press STOP button to store the settings in memory.
To reset all the settings to default status, press number 0 button in Service Mode 0
(Display : Ver
P00). When miss-operated, press number 0 button to retry.
T- P us h T m
DC driving time on Tray open operation.
Tray is DC driven at start opening.
Then Tray is driven by pulse.
Time can be set between 0-2550ms.
T- O n Ti m e
Duration time of High in pulse drive.
Time can be set between 0-255ms.
T- O f fT im
Duration time of Low in pulse drive.
Time can be set between 0-255ms.
T- P ul l C t
The number of pulses on Tray close
operation.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic cd fx 835 35 801 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic cd fx 835 35 801 in the language / languages: English as an attachment in your email.

The manual is 6,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info