683986
2
Zoom out
Zoom in
Previous page
1/2
Next page
BA 873 041amp N;DE,GB -23818- 2017.04V01
INSTRUCTION MANUAL AMPLIFIER FOR LED-STRIPS
Safety instructions
Supply voltage 12 24V DC
CAUTION!!
DANGER OF LIFE / RISK OF FIRE AND ELECTRIC SHOCK!!
Power consumption <12mA
Suitable type of lamps LED-strips
Maximum load 8A
Installation and assembly of electrical equipment must be carried out only by professional electrician!
Connect the supply voltage/frequency as stated on the product!
Disconnect device from power supply for wiring and installation purposes!
Check power supply is disconnected!
Defective devices have to be put out of service immediately!
Warranty void if housing opened by unauthorised person!
The electronic circuit is protected against a wide range of external influences. Incorrect operating may occur if
external influences exceed certain limits!
Installation and assembly of electrical equipment must be in accordance with local building and electrical codes!
Dimensions 46 x 42 x 13 mm
Weight 23 g
Permitted ambient temperature
Storage temperature
0º … +40ºC
-30º … +70ºC
Type of protection IP20 according to DIN EN 60529
Important Note
Conformity with Standard DIN EN 60669-2-1
For all transformers and lamps, please take into account the specifications of the manufacturer!
Wiring diagram
Amplifier for one-color 12-24 V DC LED Strips up to 8A.
With connectors for easy wiring of the in- and output.
The amplifier could be installed in every standard flush-mounted box.
Protection against overload, short circuit and overheat.
The amplifier allows to increase the meters of LED strips, without brightness losses, which are
controlled by only one dimmer.
For all transformers and lamps, please take into account the specifications of the
manufacturer!
Overview of the wiring
The amplifier has two inputs and one output:
1. Input of the first LED-strip. This input will be also used, if a dimmer will be installed.
2. The supply voltage of the amplifier (12-24 V DC with stabil voltage).
3. Output of the following LED-strip.
Installation
1 Disconnect installation (also the dimmer) from power supply and check that power supply is
disconnected
2 Install the amplifier according to the wiring diagram.
3 Make sure the loads are connected properly and reconnect power supply.
Wiring diagram with dimmer (paladin 873 040led)
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paladin 873 041 amp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paladin 873 041 amp in the language / languages: English, German as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info