683924
2
Zoom out
Zoom in
Previous page
1/2
Next page
BA 873010rlc N;DE,GB -23247- 2013.01-V01 - ED
INSTRUCTION MANUAL DIMMER [RLC]
Technical Features
Safetey instructions
Supply voltage
230 V, 50Hz
CAUTION!! DANGER OF LIFE / RISK OF FIRE AND ELECTRIC SHOCK!!
Installation and assembly of electrical equipment must be carried out only by professional electrician!
Connect the supply voltage/frequency as stated on the product!
Disconnect device from power supply for wiring and installation purposes! Check power supply is disconnected!
Defective devices have to be put out of service immediately!
Warranty void if housing opened by unauthorised person!
The electronic circuit is protected against a wide range of external influences.
Incorrect operating may occur if external influences exceed certain limits!
Installation and assembly of electrical equipment must be in accordance with local building and electrical codes!
Power consumption
3 VA
Suitable type of lamps
Incandescence and halogen lamps
LOAD
Incandescence, 230V Halogens &
LV Halogens with Electronic transformer
15 400 W
Halogens with Ferromagnetic
transformer
20 250 W
Max. number of pushbuttons
3 lighted pushbuttons & unlimited
non-lighted pushbuttons
Dimensions
45 x 45 x 12 mm
Weight
40 g
Important Note
Permitted ambient temperature
+40ºC
When calculating the max. loads please take into account power dissipation of transformers:.
For conventional transformers ~ 20% power dissipation / For electronic transformers ~ 2% power dissipation
For all transformers and lamps, please take into account the specifications of the manufacturer!
Storage temperature
-30º +70ºC
Type of protection
IP20 according to
DIN EN 60529
Conformity with Standard
DIN EN 60669-2-1
Description / Installation / Operation
Wiring Diagram
Description
Small size dimmer, for flush-mounting (e.g. behind standard pushbutton)
For leading or trailing edge dimming.
Automatic detection of the load type.
Protected against overload and short circuit. Built-in heat protection.
Controlled by pushbutton.
With or without memory.
Suitable for R, L & C loads:
- Incandescent & 230V halogen lamps (R)
- LV Halogen lamps with Ferromagnetic transformer (L)
- LV Halogen lamps with Electronic transformer (LC)
For all transformers and lamps, please take into account the specifications of the manufacturer!
Installation
CAUTION! Do not connect different types of lamps / loads to the same dimmer!
1 Disconnect installation from power supply and check that power supply is disconnected.
2 Install the dimmer according to the wiring diagram.
3 Make sure the loads are connected properly and reconnect power supply. The lamps flicker.
(This indicates that the dimmer has done the automatic load type detection)
4 The dimmer is ready for use.
Operation
Press shortly the pushbutton to switch the lamps on and off!
=> Switch on „No Mem“ = Lamp(s) switches on with max. brightness.
=> Switch on „Mem“ = Lamp(s) switches on with the brightness of the last switch off
With a long press you can dim!
(*)Only for very inductive loads necessary
Example:
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paladin 873 010 rlc at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paladin 873 010 rlc in the language / languages: English, German as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info