683934
1
Zoom out
Zoom in
Previous page
1/2
Next page
GB
LED RGB STRIP 3-CHANNELS WIRELESS DIMMER
TECHNICAL DATA
DESCRIPTION
Wireless dimmer compatible with the RF-KNX protocol for the control of 12~48V
DC RGB
LED strips, up to 5A per channel.
Pulse Width Modulation dimming technology (PWM).
It has 3 output physical channels (R, G and B) and 4 working channels (R + G + B). The
fourth channel allows to control the 3 RGB channels at the same time.
It has a control knob (B) which allows selecting the desired working mode.
A second control knob (A) allows to select the channel to be linked or deleted at the time of
commissioning:
- 1: Channel R.
- 2: Channel G.
- 3: Channel B.
- 4: Channel R+G+B.
Control by any RF-KNX sensor: pushbutton, remote control,...
Compatible with sensors: 676 010 rf, 673 010 rf, 670 010 rf.
CHARACTERISTICS
Working mode selector switch for the setting-up and commissioning (B):
· Prg: link programming.
· Rpt: standard operation with repeater function.
· F: standard operation.
· E: one link deletion from the selected receiver.
· Rst: all links deletion from the selected channel.
It has a Programming key (C) for linking other RF devices.
INSTALLATION
Install the actuator according to the shown wiring diagram.
OPERATION
The load connected to the dimmer 674 830 rf must be controlled remotely with a RF
transmitter.
The input channel of the dimmer responds to the objects: Info OnOff, InfoDimValue, OnOff,
DimCtrl, DimValue, Timed, Forced & Scene.
674 830 rf
Funkfrequenz
Verschlüsselte Übertragung, 868,4MHz
Reichweite: 100 m (auf freiem Feld)
Kompatibel mit Sender: 676 010 rf, 673 010 rf, 670 010 rf
Betriebstemperatur
0°C ~ +40°C
DE
FUNK DIMMER LED RGB STREIFEN 3-KANAL
TECHNISCHE DATEN
BESCHREIBUNG
Es handelt sich bei diesem Gerät um einen KNX-RF kompatiblen Dimmer für die Steuerung
von 12~48V
DC RGB LED-Streifen, mit bis zu 5 A pro Kanal.
Die Steuerung der Leuchten erfolgt durch Pulsweitenmodulation (PWM).
3 Ausgangskanäle (R, G und B) bzw. 4 Steuer-Kanäle (R + G+ B). Der vierte Kanal
ermöglicht die gleichzeitige Steuerung der 3 RGB Kanäle.
Mit dem Drehwahlschalter (B) kann die gewünschte Betriebsart ausgewählt werden.
Mit dem zweiten Drehwahlschalter (A) kann der gewünschte zu verlinkende / zu löschende
Kanal während der Inbetriebnahme ausgewählt werden:
- 1: Kanal R
- 2: Kanal G
- 3: Kanal B
- 4: Kanal R+G+B
Ansteuerung mittels KNX-RF kompatiblen Sensoren: Taster, Fernbedienung, Tasteingang
1-Kanal.
Kompatibel mit den Sendern: 676 010 rf, 673 010 rf, 670 010 rf.
SYMBOLERKLÄRUNG / FUNKTION
Wahlschalter (B) für Bedienmodus, Konfiguration und Inbetriebnahme:
· Prg: Einlernvorgang / Programmiermodus
· Rpt: Normalbetrieb mit zusätzlicher Verstärker-Funktion (Repeater-Funktion)
· F: Normalbetrieb
· E: Löschen einer Verlinkung (Verlinkung zum Empfänger trennen)
· Rst: Löschen aller Verlinkungen (des ausgewählten Kanals).
Programmiertaste (C) um andere RF Geräte zu verlinken.
Wahlschalter (A) zur Auswahl des zu verlinkenden Kanals während der Inbetriebnahme.
INSTALLATION
Bitte installieren Sie den Dimmer entsprechend nachfolgender Schritte:
1.) Vor Montage- und Installationsarbeiten Spannung freischalten.
2.) Schließen Sie den Dimmer entsprechend des Schaltplans (Abb. links) an.
3.) Schalten Sie die Spannungsversorgung wieder ein.
BETRIEB
Die angeschlossene Last des Dimmers 674 830 rf muss mit einem geeigneten Funksender
ferngesteuert werden.
Der Empfängerkanal des Dimmers ist kompatibel mit folgenden Objekten: Info OnOff,
InfoDimValue, OnOff, DimCtrl, DimValue, Timed, Forced & Scene.
Stromaufnahme <12mA
Anschlussspannung 12V
DC ~ 48VDC
Lagertemperatur
-30°C ~ +70°C
Schutzart
IP20
Angewandte Norm
EN 60669-2-1
A
Prg
Rpt
Rst
E
F
Prog
1
2
4
3
BC
RED
GREEN
BLUE
674 830 rf
12-48V
DC
3x5A
RGB+
12 ~ 48VDC
-
+
Geeignete Lasttypen LED Streifen 12V
DC ~ 48VDC
Maximale Last 5 A pro Kanal
Anzahl Kanäle 3 Ausgangskanäle (4 Steuerkanäle)
Steuerung (Drahtlos) Funk
Montage Deckenmontage (Hohlraumdecke)
Abmessungen 108 x 52 x 34 mm
Radio-Frequency
Codified transmission in 868,4MHz
Coverage: 100m (in the free field)
Compatible with Sensors: 676 010 rf, 673 010 rf, 670 010 rf
Working temperature
0°C ~ +40°C
Consumption <12mA
Power supply 12V
DC ~ 48VDC
Storage temperature
-30°C ~ +70°C
Protection degree
IP20
According to the Standard
EN 60669-2-1
Load LED Streifen 12V
DC ~ 48VDC
Maximum load 5A per channel
Channels 3 output channels (4 working channels)
Control Wireless
Mounting Over the ceiling
Dimensions 108 x 52 x 34 mm
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paladin 674 830 rf at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paladin 674 830 rf in the language / languages: English, German as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info