683961
1
Zoom out
Zoom in
Previous page
1/2
Next page
GB
673 010 rf
1-CHANNEL PUSHBUTTON WIRELESS INTERFACE
TECHNICAL DATA
Power supply 2 batteries 3V CR2025 (included)
Battery life (estimated) > 8 years (100 act/day)
Radio-Frequency Codified transmission in 868,3MHz
with ERP>8mW and a coverage of
100m (in the free field)
Compatible with KNX-RF
- CH_Generic_Switch_5 (0311h)
- CH_Battery_Status (0021h)
Protection degree IP20
Working temperature 0ºC ~ +45ºC
Storage temperature -10ºC ~ +45ºC
Weight 17g
Dimensions 46 x 42 x 13mm
DESCRIPTION
KNX-RF compatible transmitter for general purpose which emulates the working
mode of the channel code 0311h.
Mode selector switch to set the desired working mode.
Three wires:
- P1 (grey): pushbutton input
- P2 (brown): pushbutton input
- C (blue): common of the pushbuttons
Avoid to use it close to radioelectric devices, microwaves,...
A minimum distance of 2m must be maintained between the sensor and the linked
actuator.
WORKING MODES
It is possible to select different operation modes:
I.- Switch ON/OFF
R.- Dimmer
P.- Blinds switch
E.- Scene selector
In order to select the desired working mode, please follow the next indications:
1.- We start from the initial position F (operation mode).
2.- Place the mode selector switch over the desired working mode: ‘I’, ’R’, ‘P’ or ‘E’.
3.- Press any of the two pushbuttons: P1-C or P2-C.
4.- Place the mode selector switch over ‘F’ (operation mode).
These are the different working modes:
1.- Switch ON-OFF (I)
Every time that the one of the two pushbuttons is pressed it will send a message
type ‘SwitchOnOff’.
The telegram can be: ON (P1) or OFF (P2).
2.- Dimmer (R)
Every time that one of the two external pushbuttons is pressed it will send a
message type ‘Dimming_Ctrl’. The sent data can be an ON, OFF, Dimming_UP or
Dimming_Down.
Depending on the length of the pressing can be:
A.- Short press:
· P1: ON
· P2: OFF
B.- Long press (> 1 second):
· P1: Diming_Up
· P2: Diming_Down
DE
KNX-FUNK-SENDER 1 KANAL
TECHNISCHE DATEN
Stromversorgung 2 Batterien 3V CR2025 (im
Lieferumfang enthalten)
Batterielebensdauer (geschätzt) > 8 Jahre (100 Schaltungen/Tag)
Übertragungsfrequenz Kodierte Übertragung auf 868,3MHz
mit einer effektiven Sendeleistung
>8mW und einer
Reichweite von 100m (freies Feld)
Kompatibel zu KNX-RF
- CH_Generic_Switch_5 (0311h)
- CH_Battery_Status (0021h)
Schutzart IP20
Zulässige Umgebungstemperatur 0ºC ~ +45ºC
Lagertemperatur -10ºC ~ +45ºC
Gewicht 17g
Abmessungen 46 x 42 x 13mm
BESCHREIBUNG
KNX-RF kompatibler Sender für eine Vielzahl von Applikationen. Emulation des
"channel code 0311h".
Modus-Wahlschalter für verschiedene Betriebsmodi.
Drei Drähte:
- P1 (grau): Externer Tastereingang (Tastereingang P1)
- P2 (braun): Externer Tastereingang (Tastereingang P2)
- C (blau): Bezugspotential der Tastereingänge P1 und P2
Der Funksnder ist so zu installieren, dass außergewöhnlich hohe Störstrahlung
(Funk, Mikrowellen, etc.) die Funktion nicht beeinträchtigen kann.
Zwischen Sender (Sensor) und Empfänger (Aktor) sollte ein Mindestabstand von
2m eingehalten werden.
BETRIEBSMODI
Folgende Betriebsmodi können eingestellt werden:
I.- ON/OFF
R.- Dimmer
P.- Rollladensteuerung
E.- Szenenkontrolle
Um den gewünschten Betriebsmodus auszuwählen gehen Sie bitte wie folgt vor:
1.- Im Auslieferungszustand befindet sich der Modus-Wahlschalter auf Position 'F'.
2.- Drehen Sie den Modus-Wahlschalter in die gewünschte Position:
Betriebmodus 'I', 'R', 'P' oder 'E'.
3.- Bestätigen Sie Ihre Auswahl mit Tastendruck auf einen der angeschlossen
Taster: P1-C oder P2-C.
4.- Drehen Sie den Moduswahlschalter zurück in Position 'F'.
Erläuterung der Betriebsmodi:
1.- ON-OFF (I)
Bei Tastendruck (Tastereingänge P1 oder P2) wird der Nachrichtentyp 'SwitchOnOff'
gesendet.
Das gesendete Telegramm ist: ON (P1) oder OFF (P2).
2.- Dimmer (R)
Bei Tastendruck auf einen der extern angeschlossenen Taster wird ein Telegramm
mit dem Nachrichten-Typ 'Dimming_Ctrl' gesendet. Abhängig von der Länge des
Tastendrucks wird einer der folgenden Nachrichten gesendet ("ON", "OFF",
"Dimming_UP" oder "Dimming_Down").
A.- Kurzer Tastendruck:
· P1: ON
· P2: OFF
P
E
R
F
I
PULL THE PLASTIC FOIL OUT TO ACTIVATE THE BATTERY
ENTFERNEN SIE DIE KUNSTSTOFFLASCHE UM DIE BATTERIE ZU AKTIVIEREN
P1 P2
P
E
R
F
I
CC
P2
P1
673 010 rf
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paladin 673 010 rf at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paladin 673 010 rf in the language / languages: English, German as an attachment in your email.

The manual is 0,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info