equipment must be only carried out only by a skilled
Person! Otherwise fire danger or danger of an
electric shock exists!
!
Connect the supply voltage/frequency as stated on
the product label!
!
Warranty void if housing opened by unauthorised
person!
!
The electronic circuit is protected against a wide
range of external influences. Incorrect operating
may occur if external influences exceed certain
limits!
The time switch is delivered in sleep-mode, the display is switched off.
Press -button for 1 second.
The current date and time is already programmed and European daylight savings time is
activated.
Select the desired language by pressing -buttons and confirm it by pressing .
(Remark: By pressing
you move one step backwards from the current position)
If required, date, time and daylight savings time mode can be adjusted also by pressing
-buttons and a subsequent confirmation with .
When using the astro function it is obligatory to enter the geographical position of the place
of the installation of the device. Choose with -buttons between „location“ (pre-defined
cities) and „position“ (longitude and latitude). Confirm your choice again with
. (The
easiest way is choosing a pre-defined city within the „locations“-menu.)
Enter the nearest city or the geographical coordinates with -buttons and confirm with
3. Menu overview 4. Symbol legend
Channel is switched ON
Channel is switched OFF
For the current date the “holiday program” / “permanent by date” is activated
Standard programming step
Current state is based on a manual over-ride. The state will be cancelled with the next programming step.
Current state is based on a manual over-ride. The state is permanent until terminated manually (7).
Days of the week Monday, Tuesday, ... Sunday;
The underscores indicate if the program is active for the days above.
Element within sub-menu “program delete”
Astro function: Current state is based on a sunrise or sunset taking into account an optionally adjusted
Offset (10 / 11).
The time switch is locked; to unlock the device the PIN has to be entered (13).
5. Key function 6. Handling advice 7. Channel ON OFF/ Permanent P
1. To access the Enter-mode (program, adjustments, options) from the automatic-mode.
2. To revert to the beginning of the current (sub-) menu.
1. To adjust the flashing digit.
2. To scroll through a choice
1. Automatic-mode: To switch the channel ON or OFF until the next programming step occurs.
2. Automatic-mode: A push longer than 3 sec. = Permanent switching status (7).
1. To activate the time switch when operated without power supply.
2. To confirm the selection or the entered data.
The time switch is programmable without external power supply after
pressing the
-button.
To revert one step or one level back while in the Enter-Mode press .
After completion of a (sub-) menu confirming end will return the device
into the automatic-mode.
With the choice changes from end to continue. By confirming
continue the time switch returns to the beginning of the current
(sub-) menu.
When confirming end before completion, the time switch returns to the
automatic-mode without saving the entered data.
Channel
ON OFF
By pushing
-buttons (-buttons) a manual switch of the
channels take place. The resulting switching status is marked
with the hand-symbol and remains until the next programming
step occurs. (temporary over-ride)
Permanent switching status P
By pressing the corresponding channel button
for more
than 3 sec. the channel is permanently switched ON or OFF.
The status remains until the next manual switching occurs (> 3
sec.). (permanent over-ride)
8. New Program (See also the example (9)) 9. Example „New Program“ (For a regular switching time)
Step A. to C. please refer to point 9. (Example “New Program”)
A.If power supply is disconnected press for one second. The display appears in Automatic-Mode.
B.Press
, the time switch is now in the Enter-Mode.
C.Confirm
Program with .
D.Confirm
newprogramwith.
E.Choose the desired channel with
and confirm with .
F.For regular switching times choose
on or off with -buttons and confirm with . (The astro
switching times
astro ON or astro OFF please refer to point 10)
G.Within this level you activate the days of the week (1…7) on which the switching time should happen.
With
you activate “yes” or deactivate “no” the corresponding date. Confirm each day with .
H.Adjustment of the time: Hours
and.Minutes and.
I.Verify the entered switching time: If the flashing summary of the programming step is correct, verify
on
or off with
. After verification you have the choice between edit/delete and end with .
J.If you want to proceed with programming, confirm
next switchingwith .
To leave the programming menu confirm
end.
10. Astro-function 11. Astro-adjustments 12. Program permanent
Program ->new program -> channel A/or B ->…
The astro function allows you to switch the whole year through in relation to sunset
and sunrise, e.g. for illumination purposes (
astro-ON with sunset and astro-OFF
with sunrise).
The programming is made according to (8 / 9) with following difference:
Choose astro function astro ON and astro OFFrespectively(9F).
While programming an astro program step there will be no time (hh:ss) suggested
(8H / 9H). Instead of this you have the possibility to enter an
offset. E.g. if you
like to switch on the light 20 minutes before sunset would you enter an
offset of
minus 20 minutes while programming
astro ON.
Adjustment ->Astro ->…
The following options concerning the astro function are adjustable to satisfy your needs:
Position location: Adjust your geographical position with pre-defined choice
of regions/countries and cities.
Position coordinates: Adjust your geographical position with longitude,
latitude and time zone.
Block Sunrise:Earliest possible point in time for the astro function (sunrise).
Block Sunset:Latest possible point in time for the astro function (sunset), e.g.
switching on the light not later than 10 p.m. even if sunset is later.
Program ->new program ->channel A/B ->permanent -> …
One permanent by date programming step (holiday function) for each
channel is possible. During the desired period (The function is valid for the
whole days) the channel can be switched off (
permanent off) or on
(
permanent on).
The programming of this function is as described in (8 / 9).
The choice permanent will not be offered anymore within the menu new
program when already in use. The switching time can be modified and
deleted within
Program modify (14) and Program delete (13)
respectively.
13.Additionaladjustments 14. Program modify
MenuMain menuApplication
Program query
Program
To query the programming steps and remaining memory locations
Program copy
Program
Copy from one channel to another. Memory of the channel won’t be
overwritten; the copied switching steps appear additionally.
!
Permanent by date function is not copied!
Program delete
Program
Deletion of switching time(s). The program for all channels, single
channels and single programming steps within on channel can be
deleted.
Date-Time
Adjustment
Adjustment of date and time
Summertime
Adjustment
Adjustment of the daylight saving time mode (ON/OFF)
Language
Adjustment
Choice of languages
Factory Defaults
Adjustment
Reset to the state of delivery. Date, time and switching program will
be lost!
Counter
Options
Displays the hour counter and pulse counter for each channel and
the time switch itself.
PIN-Code
Options
The time switch can be locked with a 4-digit PIN-Code. The code
can be adjusted, activated and deactivated. If you have forgotten
the Code please call customer service.
Reset-Function
Press all front keys for 2 seconds. The time switch is reset. The values for date and
time will be deleted and have to be re-entered. The switching program has not
been deleted!
Program ->Program modify ->…
Within Program modify each single switching time can be modified.
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Paladin 1724X3 pro - SC 28.X3 pro at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Paladin 1724X3 pro - SC 28.X3 pro in the language / languages: English as an attachment in your email.
The manual is 0,48 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
Others manual(s) of Paladin 1724X3 pro - SC 28.X3 pro
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
