682681
13
Zoom out
Zoom in
Previous page
1/36
Next page
6.2.4 Wielvlucht van de aandrijfwielen instellen
U kunt de wielvlucht van de aandrijfwielen veranderen door de wielvluchtmodules te vervangen door andere. Dit
heeft de volgende effecten:
Stand aandrijfwiel Effecten
Wielvlucht 3°/6°/9°
Rolstoel wordt wendbaarder, draait gemakkelijker en heeft in zijwaartse
richting een grotere kantelstabiliteit
Totale breedte neemt toe
Rolweerstand neemt toe
0°-stand
Smalle spoorbreedte, rolstoel rijdt precies rechtuit
Geringe rolweerstand
6.2.4.1 Wielvlucht van de aandrijfwielen instellen op 0°/3°/6°/9°
Het modulaire systeem van het product omvat wielvluchtmodules waarmee de aandrijfwielen in verschillende stan
den kunnen worden gezet (recht (0°) of schuin onder een hoek van (zie afb.9, pos.1), of (zie afb.9,
pos.2)).
1) Verwijder de wielen.
2) Zet de rolstoel ondersteboven.
3) Draai de stelbout in de klemflens los (zie afb.5, pos.1; zie afb.11, pos.1).
INFORMATIE: het is zowel mogelijk eerst de wielvluchtmodule aan de ene kant en daarna die aan de
andere kant te vervangen als beide tegelijk.
INFORMATIE: zorg ervoor dat u de spoorbreedte aan weerszijden symmetrisch instelt.
4) Verwijder de wielvluchtmodule:
alleen bij wielvluchtmodule 0°/3°: steek de steekas van het aandrijfwiel als hulpmiddel voor het verwijde
ren in de wielvluchtmodule (zie afb.10, pos.1/2) en verwijder de wielvluchtmodule met behulp van de stee
kas;
alleen bij wielvluchtmodule 6°/9°: verwijder de wielvluchtmodule inclusief fitting met de hand (zie
afb.12, pos.1).
5) Vervang de wielvluchtmodule door een andere en monteer de vervangende module.
Stel de spoorbreedte zo in dat de aandrijfwielen in de schuine stand waarin ze staan, onbelemmerd kunnen
draaien (zie pagina11).
Alleen bij wielvluchtmodule 0°/3°: bij de montage moet de gehele wielvluchtmodule volledig worden
omsloten door de klem. Controleer de positie door deze na te meten (zie afb.7).
Alleen bij wielvluchtmodule 6°/9°: bij de montage moet de wielvluchtmodule tot de aanslag in de klem
flens worden geschoven (zie afb.12, pos.2).
6) Draai de stelbout iets aan, zodat de wielvluchtmodule vast blijft zitten aan de klemflens.
7) Vervang de wielvluchtmodule aan de andere kant op dezelfde manier. Zorg ervoor dat u de wielvluchtmodules
symmetrisch instelt.
8) Bevestig de wielen.
9) Stel de sporing in (zie pagina14).
10) Draai de stelbouten aan met 10 Nm (zie afb.5, pos.1; zie afb.11, pos.1).
9 10
Ottobock | 13Ventus
Instellingen
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Ventus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Ventus in the language / languages: Dutch as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info