682695

Otto Bock Discovery Manual

36
Zoom out
Zoom in
Previous page
1/38
Next page
35
Figure 39 Figure 40
Mounting (Fig. 39)
- Start pressing the underside of the tire over the edge of the rim behind the valve. Pump the tube with a Pump the tube with aPump the tube with a
small amount of air until it is round; then insert it in the tire.
- Check the tube for folds. If folds are present, release some air. You can now mount the rest of the tire You can now mount the rest of the tireYou can now mount the rest of the tire
starting with the section of tire opposite the valve by gently pressing the tire toward the valve.
Inating (Fig. 40)
- Check around the tire on both sides to see whether the tube is clamped between the edge of the tire
and the rim. Push the valve back slightly and pull it out again so the tire is well-seated in the valve area. Push the valve back slightly and pull it out again so the tire is well-seated in the valve area.Push the valve back slightly and pull it out again so the tire is well-seated in the valve area.
- Fill the tire with just enough air so that it can still be pressed in easily with your thumb. Be sure the tire Be sure the tireBe sure the tire
is centered on the rim before continuing. If not, let some air out and realign the tire. Inflate the tire to the If not, let some air out and realign the tire. Inflate the tire to theIf not, let some air out and realign the tire. Inflate the tire to the Inflate the tire to theInflate the tire to the
pressure indicated in the air pressure table in section 'Technical Data', and tighten the dust cap.
For many screw connections screws and nuts with thread locks are used.
If you have to open such screw connections replace the respective nut or screw with a new one with new
thread lock.
11 Terms of Warranty
The Otto Bock Warranty applies only when the product is used according to the specified conditions and for the
intended purposes, following all manufacturer’s recommendations (also see our general terms of sales, delivery
and payment).
… 36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Discovery at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Discovery in the language / languages: English, German as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info