Anterior seat height Avantgarde T, Ti 8.9, Ti Ultra and VR (in cm)
(1)
Seat height table Avantgarde T, Ti 8.9, Ti Ultra and VR
1) Indicates without a seat cushion and with 0° seat inclination.
2) Combination is not possible.
If the adapter for large anterior seat heights is used, all values + 35 mm.
Between the front and rear axle position, the axle can be adjusted horizontally in 6 positions (A to F). Position A, allows a passive center of
gravity, whilst in position F, the most active center of gravity is reached. Without indication of the desired rear wheel position, it will be factory-
mounted in position C/7.
Note:
The values indicated are measurements which have been theoretically determined, and not all adjustment possibilities can be used for all
wheelchair models. Further, the adjustment combinations are limited due to the sturdy frame geometry. We reserve the right to technical
alterations and deviations by 5%.
1) Indicates without a seat cushion and with 0° seat
inclination.
2) Locking positions can be counted on the posterior brace
of the rear wheel attachm. device (see sketch).
Position
Caster diameter
3“
4“5“140 mm6“7“
Caster fork
short
Position 4
Position 3
Position 2
Position 1
*)
*)
42,3
43,6
*)
42,4
43,6
44,9
*)
43,5
44,7
46
*)
*)
45,7
47
*)
*)
46,2
47,5
*)
*)
*)
49
Caster fork
long
Position 4
Position 3
Position 2
Position 1
*)
*)
46,1
47,3
*)
46,1
47,4
48,6
46
47,2
48,5
49,8
47
48,2
49,5
50,7
47,5
48,7
50
51,2
49
50,2
51,5
52,7
The anterior seat height and posterior seat heights are dependent on the
selected wheel size and mounting position. Please refer to the seat height
table! Seat inclination: 10 cm maximal seat height difference between
anterior seat height and posterior seat height (corresponds to a seat
inclination of approx. 15°).
Note: Without indication of the desired seat inclination, it will be factory-set at approx. 4°.
Posterior seat height Avantgarde T, Ti 8.9, Ti Ultra and VR (in cm)
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Otto Bock Avantgarde Ti at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Otto Bock Avantgarde Ti in the language / languages: English, German as an attachment in your email.
The manual is 3,94 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
