539418
1
Zoom out
Zoom in
Previous page
1/2
Next page
Preselection or „CUSTOM“ setting
Vorauswahl oder eigene Einstellung „CUSTOM“
Présélection ou configuration manuelle „CUSTOM“
Bike 1
Bike 2
U L
00000KM
MACRO free, MACRO high free, MACRO X & MACRO high X
BASIC SETUP
GRUNDEINSTELLUNGEN
CONFIGURATION DE BASE
Auf der Rückseite des MACRO den Deckel mit einer
Münze linksdrehend öffnen und die Batterie mit dem
+Zeichen nach oben einlegen. Anschließend den Deckel
wieder rechtsdrehend schließen.
Das Gerät durch Drücken des AC Knopfes auf der
Rückseite mit einem spitzen Gegenstand einschalten.
Haben Sie das Zubehör MACRO pc, dann können Sie
ihren MACRO bequem über Ihren PC konfigurieren.
Lesen Sie hierfür die MACRO pc Anleitung.
Manuelle Einstellung:
MACRO in den Halter einrasten und die mittlere Taste
(M) 3 Sek. gedrückt halten um ins Konfigurationsmenü
zu gelangen. Mit U und L das gewünschte Menü
ansteuern. Um Änderungen vorzunehmen M drücken.
Open the back of the MACRO with a coin by turning the
lid to the left and insert the battery with the + sign
showing to the top. Afterwards close the lid by turning it
to the right.
Switch on the device by pushing shortly the AC button
on the back of the MACRO with a pen.
If you have the MACRO pc accessory you have the
option to easily configurate your MACRO through your
computer. Please refer to the MACRO pc instructions.
Manual configuration:
Connect the MACRO with the holder and push the
middle button (M) for 3 sec. to access the configuration
menu. Navigate through the menus with U and L. To
select a menu to perform changes press M.
Ouvrez l‘arrière du MACRO avec une pièce en tournant
le couvercle vers la gauche et insérez la pile avec le
signe + montrant vers le haut. En suite fermez le
couvercle en le tournant vers la droite.
Allumez l‘ordinateur en appuyant avec un stylo sur le
bouton AC à l‘arrière du MACRO.
Si vous avez l‘accessoire MACRO pc vous pouvez
configurer votre MACRO à travers de votre ordinateur.
Veuillez suivre les instructions du guide MACRO pc.
Configuration manuelle:
Connectez le MACRO avec son support et appuyez la
touche de milieu (M) durant 3 sec. pour accéder au
menu de configuration. Faites défiler les menus avec U
et L et sélectionnez le menu avec M pour faire des
changements.
Cyclometer
Fahrradcomputer
Ordinateur de vélo
2032 3V
+
AC
AC
CLOCK
Uhr
Montre
ODOMETER
Gesamt KM
KM total
STOPWATCH
Stoppuhr
Chronomètre
WHEEL SIZE
Radumfang
Taille de roue
HRT Limit
Pulsgrenze
Zone cardio
U/L U/L U/L U/L
EXIT
Verlassen
Quitter
POWER CALIB*
Kalib. Leistung
Calib. puissance
USER DATA
Benutzerdaten
Infos utilisateur
UNIT
Maßeinheiten
Unités
U/L
high free & high X
ALTITUDE
Höhe
Altitude
U/L
U/L
U/L
U/L
Macro X & high X
U/L
CONFIGURATION MENU
EINSTELLUNGSMENÜ
MENU DE CONFIGURATION
Select with M
Change with U or L
Wählen mit M
Ändern mit U oder L
Choisir avec M
Changer avec U ou L
U
M
L
Sobald ein Menü mit M aufgerufen wurde, kann über U
und L die blinkende Einstellung verändert werden. Die
Änderung anschließend mit M bestätigen.
As soon as you have selected a menu with M you may
change the flashing values with U and L. Afterwards
confirm the modification with M.
Aussitôt que vous avez choisi un menu avec M vous
pouvez modifier les paramètres clignotant avec U et L.
Ensuite confirmez les changements avec M.
PAIRING & SEARCHING
PAIRING & SUCHE
PARAINAGE & RECHERCHE
only/nur/seulement
Macro X & high X
Vor der ersten Nutzung des MACRO X & high X müssen
die Sensoren und der MACRO einmalig miteinander
gekoppelt werden. Hierfür muss die obere (U) und
mittlere (M) Taste zeitgleich für 2 Sek. gedrückt werden.
Sobald das Display PAIR? anzeigt mit M bestätigen. Der
Pairing-Prozess startet. Stellen Sie sicher, dass alle
Sensoren in unmittelbarer Nähe und aktiv sind.
Vor jeder Benutzung muss der MACRO die Sensoren
suchen. Dies geschieht automatisch nach dem
Aufwecken oder kann manuell durch zeitgleiches
Drücken von M und L für 2 Sek. erreicht werden.
Before the first use of the MACRO X & high X the
sensors have to be paired once with the MACRO.
Therefor push the upper (U) and middle (M) button at the
same time for 2 sec. As soon as PAIR? is displayed
confirm with M. The pairing process starts. Be sure that
all sensors are active and in reach of the MACRO.
Before each ride the MACRO has to search for the
sensors. This normally happens automatically after
wake up or may be achieved manually by pushing at the
same time M & L for 2 sec.
Avant la première utilisation du MACRO X & high X le
capteur doivent être parrainé avec le MACRO. Pour ceci
appuyez 2 sec. sur les touches U et M en même temps.
Lorsque sur l‘écran s‘affiche PAIR? confirmez avec M.
Le processus de parrainage commence. Assurez vous
que tous les capteurs sont actifs et près du compteur.
Avant chaque sortie le MACRO doit trouver les capteurs.
Ceci ce fait automatiquement quand il se réveille ou
manuellement en appuyant sur les touches M et L pour
2 sec. en même temps.
EN
DE
FR
CR2032
3V
+
Accessories / Zubehör /Accessoires
- Heart rate (Heart2feel X² or free³)
- Cadence (2S X cad² or 2H cad³)
- PC connector (MACRO pc)
- Mountainbike control (2H RC)
²only Macro X & high X
³only Macro free & high free
MACRO free & high free
MACRO X & high X
CR2032
3V
+
4x
1x
INSTALLATION
MONTAGE
MONTAGE
3-4mm
M > 3 sec.
M
U/L M
M
U/L
Select
Wählen
Choisir
Change
Ändern
Changer
U+M
M+L
> 2 sec.
M
SETTINGS
EINSTELLUNGEN
CONFIGURATION
Hour
Stunden
Heures
Minutes
Minuten
Minutes
M
Year
Jahr
Année
M
Month
Monat
Mois
M
Day
Tag
Jour
M
0000MM
Upper limit
Obergrenze
Limite supérieure
M
Lower limit
Untergrenze
Limite inférieure
M
U L
M
M
00000KM
00000KM
M
00000KM
M
M
Auto
Manual
M
Sample rate (5/10/20 sec. - Clear memory)
Aufzeichnungsintervall (5/10/20 Sek. - Speicher löschen)
Intervalle d‘enregistrement (5/10/20 sec. - Vider la mémoire)
M
Distance
U L
Time
M
M
20.0KM
M
15.0KM
2:00
M
3:00
M
Sex
Geschlecht
Sexe
Weight
Gewicht
Poids
M
M
+/-
Altitude (m)
Höhe (m)
Altitude (m)
Total m +
Calibrating
Kalibrierung
Calibrage
Done
Fail
24 H
12 H
U L
M
M
Bike 1
Bike 2
U L
M
M
00000KM
M
M
M
0000MM
M
only MACRO
high free & high X
only MACRO
X & high X
Bike 1
Bike 2
U L
Current
Home
U L
km/h
m/h
U L
kg
lb
U L
°C
°F
U L
M
M
M
M
M
M
M
M
Total m -
M
M
or/oder/ou
M
U/L
1
CADENCE
3-4mm
<
<
Press
close & cut
U
M
L
U
M
L
1x
1x
CONTENT
INHALT
CONTENU
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Osynce Macro high free at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Osynce Macro high free in the language / languages: English, German, French as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Osynce Macro high free

Osynce Macro high free User Manual - Dutch, Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info