563035
2
Zoom out
Zoom in
Previous page
1/2
Next page
SWITCHING ON
1. Spread the blanket out flat on the mattress ensuring there are no folds with the lower edge is at the
bottom of the bed and the power lead towards the head end. Then lay a sheet over it.
take care not to allow any folds or kinds to develop where mattress sections abut. Each time the blanket
is used please check that it is spread absolutely flat on the mattress. Then place a blanket or duvet on
top of the electric mattress heater and covering sheet to prevent loss of heat.
2. Push the flat plug of the blanket into the socket.
The blanket may only be used with 220-240 Volts a.c.
Switch on the blanket using the hand-operated switch.
3 = maximum warmth, warm-up time approx. 30 minutes. The indicator light will keep on and
won’t flash
2 = moderate warmth, the indicator light will flash
1 = minimum warmth, the indicator light will weak flash (setting 1 is recommended for all
night use.)
0 = OFF, the blanket is disconnected from the power supply.
The indicator light lights up during the heating phase: now you can experience the pleasant
warmth. After about 120 minutes the blanket silently switches off automatically.
ADDITIONAL NOTE:
The electronic components inside the switch may lead to a slight warming of the switch when the blanket is on.
Therefore the switch must not be covered or placed on top of the electric mattress heater when it is in
operation.
You should not reply on using your hands to gauge the blanket’s temperature because they are much les
sensitive to heat than the surface of the human body. A temperature, which may feel tepid to your hand, may
feel unpleasantly hot on your body.
The blanket must be covered by a duvet, for example, because otherwise there will be a high loss of heat and
the blanket cannot warm up properly.
Qualified persons using original replacement parts may only undertake repairs to the electric mattress heater.
Repairs carried out by unqualified persons may cause substantial risk to the user.
CLEANING AND CARE
The electric mattress heaters should be kept clean because it must not be laundered or dry-cleaned.
Small stains can be removed with a cloth or a damp sponge, perhaps using some mind liquid detergent.
Before cleaning the blanket, always remove the plug from the power socket. The blanket must not become
wet. If it gets damp it needs natural drying in the air.
Never switch on the blanket to dry it.
RETAIN FOR FUTURE USE
Examine the appliance frequently for signs of wear or damage. If there are such sign or if the appliance has been misused,
return it to the supplier prior to nay further use.
TECHNICAL DATA:
Model: ORION OWP10UBT
Size: 150 (L) * 140 (W) cm
Material: Polyester
Voltage: 220V-240V~ 50Hz
Watts: 60W max. for individual control
Net weight: 1,5kg
AC cord length: 2,6m
Color: white
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Orion OWP10UBT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Orion OWP10UBT in the language / languages: English as an attachment in your email.

The manual is 0,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info