563085
2
Zoom out
Zoom in
Previous page
1/2
Next page
6
your foot. The digit “ ” will display. Then the display will show “0.0” This indicates that the
scale has been setup correctly.
a. Note: This “Scale Setup” procedure applies only after installing a battery. After
completing “Scale Setup”, it does not need to be performed again unless battery is
removed and replaced.
b. Note: If you step on the platform before “0.0” appears, you will not obtain a reading. If
this happens, step off the scale, then wait for display to turn off, follow above steps to
setup scale.
SCALE OPERATION
To measure weight, simply stand with both feet in the center of the scale’s glass platform. Be sure to
stand erect and remain still. After 3 seconds the display will flash your weight and then display it steady.
Note: If a weight less than 10kg is placed on the scale, the scale will not activate. To weigh
something less than 10kg, activate the scale first by tapping the front corner (right or left) of the
scale with your foot.
When no weight is on the scale for 10 seconds, the scale will turn off automatically.
GETTING ACCURATE READINGS
1. If the scale has not been used for a long time, proceed as follows:
a. First, step lightly on the front corner (right or left) of the scale first to activate the scale.
b. Second, wait for the scale to turn off. Then you may use the scale normally.
2. If the scale is moved, proceed as follows:
a. remove the battery from the scale for 5 seconds
b. replace the battery
c. follow “Scale Setup” instruction (listed in Preparations Before Use above)
3. Place scale on flat hard surface. Do not use scale on carpet because the reading will be inaccurate.
4. If the reading appears inaccurate, please check if the battery and the contact point are well connected.
If scale has been in use for a long time, replace the battery and try again. If necessary, contact the
local franchisers or contact our company.
USAGE NOTES
1. When the display shows «Err», it means that the scale is overloaded.
2. When the display shows «Lo», it means that the battery is low. Please replace the battery as soon as
possible.
3. If scale display shows random digits or scale does not automatically shut off, proceed as follows:
a. remove the battery for 10 seconds
b. replace battery
c. follow “Scale Setup” instruction (listed in Preparations Before Use above)
Subject to change without notice
Extra information on ORION company web-site www.orion.ua
We take your opinion and offers by E-mail support@orion.ua
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Orion OS-08B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Orion OS-08B in the language / languages: English as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info