563016
7
Zoom out
Zoom in
Previous page
1/9
Next page
www.orion.ua / support@orion.ua
7
Press three times for strong
16. Cool/Warm Button
Press Cool/Warm button to select warm humidification. The warm mist temperature will be about 45°.
When you choose the warm humidification, the Heat light will turn on.
17. When the Refill light turn on, it’s time to refill the water tank.
MAINTENANCE
Always unplug the unit before servicing it in any way.
Be careful when handling the water if warm humidification was selected. The water temperature of the
water remaining in the unit after user may be high.
Do not submerse the unit in water, or allow water to enter anywhere on the unit except the designated
water tank.
Water tank and water basin
1. Fill water tank with 1 teaspoon of household bleach in 1 gallon of water. Let stand
twenty minutes, shaking vigorously with two hands every few minutes, drain and rinse with
clean water until the bleach smell is gone. Dry with a clean cloth or paper towel.
2. Wipe the water basin with a soft cloth dampened in the cleaner and water solution.
Rinse the water basin with cool water. When cleaning the water basin do not place the
nebulizer directly under the water tap.
DO NOT IMMERSE WATER BASIN IN WATER.
3. Wipe all exteriors surfaces of the base with a soft, dry cloth. Do not immerse the base in
water or use water to clean the base. As with any electrical appliance, an electric shock
may result or the humidifier may be damaged.
Note: Clean the inside of the water tank at least once a week
Ultrasonic disk
There may be some lime deposits in the nebulizer, Particularly in areas with hard water. Overcome this
drawback by cleaning the nebulizer with water and vinegar on a soft cloth regularly, as follows:
1. Dampen a cloth with vinegar and wipe the nebulizer gently, until the lime deposits disappear completely.
2. Rub down gently with a dry cloth and remove remains of humidity
3. Do not rub the nebulizer with solid objects.Do not clean with chemical products.
Air filter
1. Gently wipe away debris from the filter with a soft cloth.
Water level sensor
The water level sensor is made of three key parts. When cleaning DO NOT MISPLACE these parts and MAKE
SURE that you assemble these three parts correctly after cleaning and before operating humidifier. They are as
follows:
Plastic Cap-this part has 4 flat tabs coming out form the bottom and is placed on top of a plastic pin.
Water Float- a small round part resembling a “life saver” candy located underneath the Plastic Cap.
Pin-plastic pin that secures water float and plastic cap.
To clean the water float unscrew the plastic cap from the pin. Remove the water float and clean by wiping the
parts with a soft damp cloth. Replace the parts by first putting the water float onto the pin and re-screwing the
plastic cap onto pin.
Water Level Sensor
Water Float Plastic pin
Plastic Cap
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Orion ORH021CW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Orion ORH021CW in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info